Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Experimental candle holder

Posts

Experimental candle holder

#1

Experimental candle holder

DougJ in Crawfordsville, IN

>Inspired by some vases I saw at the St Louis wood show, I thought I'd give this (started out as a vase) candle holder a try. I used a left over piece of the box elder that I got from Kevin Gerstenecker last year. Measures at about 10" tall and 3" wide at the base bottom. No finish is applied as this was just an experiment.

Pucker factor on a scale of 1 to 10 is 7 1/2.

As always open comments are welcome and encouraged.


img

Re: Experimental candle holder

#2

another 

DougJ in Crawfordsville, IN

>


img

Re: Experimental candle holder

#3

another 

DougJ in Crawfordsville, IN

>


img

Re: Experimental candle holder

#4

good job

john lucas

>Somebody's playing with inside out turning. Good experiment. I think that has a lot of possibilities.

Re: Experimental candle holder

#5

Re: another

Dick Parr

>Great job Doug.