WE MOVED...
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Little Pear

Posts

Little Pear

#1

Little Pear

Jennifer@Indy.USA

>Happy Friday All,

Here's little bowl that I made the other day. It's a piece of pear that I burned a texture on the inner bowl and then I experimented with the swooshes cut in the rim. After turning it, and sanding, I broke off a little piece of popcicle stick to use as a shim. I put this piece of the stick between the jaw and the shoulder where it usually seats. This brought that side of the bowl out just enough so that when I used my little 1/4" skew on the face of the bowl it only hit one side. Then I did the sme thing on the opposite side of the chuck, to bring out the other side. This is what I ended up with. Then I painted the swooshes with black gesso. I then took the spacer out and made one last pass with a gouge to clean up the extra gesso. I think there's lots of opportunity for design ideas here. Something different...kind of fun. This one is already out the door, so I guess the buyer liked it :)

It's not quite 4" diameter. Finished with Danish oil, then Rockler Poly wipe on.

All comments welcome. The picture needs improvement.

Thanks for Looking.

Jennifer


img

Re: Little Pear

#2

Another View of Little Pear

Jennifer@Indy.USA

>This picture shows the texture inside a little better. A little blurred though. Ugh.

Jen


img

Re: Little Pear

#3

Neat idea, Jen.

Don Henthorn

>I can see why someone took that one home. Nice form.

Re: Little Pear

#4

Re: Little Pear

georgetroy

>Very good Jen. Making the most of the Pear. GT

Re: Little Pear

#5

Re: Another View of Little Pear

Terry Quiram, Roanoke Illinois

>Jen

Thats pretty cool. Is the texture in the center done with a burr or is it burnt?

Terry

Re: Little Pear

#6

"Pair"?! It's only one!

Joanne in Pt. Pleasant, PA

>Not being a turner, I have almost no idea of what you just said you did. But I had to come out of "Lurker Mode" to say that I love this little bowl. It looks like it would fit so nicely and feel smooth in the hand(s). I like the burning and rim, but I particularly like where you left the knot or pitch or whatever that thing is in the top edge of the bowl. I'll bet the lucky buyer WISHED there was a 'pair of pear'.

Re: Little Pear

#7

Re: "Pair"?! It's only one!

Lee Buck

>Thats why its a little pair

Re: Little Pear

#9

GREAT!

Chris K in MD

>Jen,

I really like the effect of technique, BTW what is the size of the bowl?

Re: Little Pear

#10

Re: Little Pear

Jim Shaver - Oakville, Ontario

>Hi Jen,

A very creative little turning...and one that shows that size can be as much fun to play with design as much as something larger...

:-)

Take care,

Jim

Re: Little Pear

#11

Clever and a very nice result, Jennifer.

Eddie Pacheco; San Jose, Ca.

>

Re: Little Pear

#12

Re: GREAT!

Jennifer@Indy.USA

>Thank you Chris :)

This one is just under 4" wide.

Jen

Re: Little Pear

#13

Re: "Pair"?! It's only one!

Jennifer@Indy.USA

>Thanks Joanne....nice to see you pop in over here on the round side :)

Jen

Re: Little Pear

#14

Re: Little Pear

Jennifer@Indy.USA

>Thanks Jim :)

I'm not sure what it is aabout these smaller turnings? I just love making them. I suppose I could have saved a bunch of money on my General had I known I was never going to really need it....but then again....life just wouldn't be the same without my General :)

Jennifer

Re: Little Pear

#15

Re: Another View of Little Pear

Jennifer@Indy.USA

>Thanks Terry,

The texture is from the burner. It was a hair pen that I used to burn. Apparently a hair pen is for making very fine lines to look like fur on animals...I burned it much deeper than it is intended to be used.

Jen

Re: Little Pear

#16

Re: Neat idea, Jen.

Jennifer@Indy.USA

>

Re: Little Pear

#17

Re: Little Pear

Chris DiCiaccio

>Jennifer, what a great idea. I believe that will be the first of many, leading to other interesting innovations. Great work, thanks for posting.

Re: Little Pear

#18

Oh, you mean bowl not Pear

john lucas

>Your just having way too much fun. Must be the fumes from that new heater. I love your bowl, especially the skew marks. John

Re: Little Pear

#19

Keith Tompkins

Re: Another View of Little Pear

Keith Tompkins

>HI Jen, Yep, it's neat! You could have some fun doing the same thing around the exterior of a bowl as well. I think it was Christian Burchard who did that with spheres.

Re: Little Pear

#20

Re: The Shirley Swoosh Technique!!

Allen Neighbors

>Not being able to get out to my shop yet, I spent most of last evening, and several times during the night I woke up thinking about this.

So many times we finish a piece, and about one of the features we say, "Oh, this is a variation of a technique I saw somewhere. I can't remember who it was."

We need to name this the Shirley Swoosh Technique, so Jennifer gets the kudos for it.

What d'ya say, folks?

Allen

Re: Little Pear

#21

Re: Little Pear

William Duffield, on the Cohansey

>A small point: I don't think you could really call it the "first of many", but it sure is lovely, and the ideas are well worth pursuing. I have (and treasure) one that might be the second in the series, in apricot, thanks to Jennifer and "Contrail Santa."

Re: Little Pear

#22

Ha! Not hardly!

Jennifer@Indy.USA

>Al,

Trust me, I'm not the first to do this :)....but thanks for the comments! I have a hard time thinking outside the box or coming up with anything innovative...ESPECIALLY, when is comes to techniques! I am looking forward to playing with this stuff though. I use to love Spirograph, and I kind of think this may turn out the same. I never knew what I was going to end up with when playing with Spirograph, but the fun of putting my pencil in different holes on the wheels to see what new design would come of it was so much fun! With this you can vary the shim thickness, it's location, the location of the tool on the piece, the depth of cut, the number of cuts...it's limitless!

No, I did not come up with this idea....but I'm going to have fun playing with it.

Jennifer :)

Hope you're feeling better!