Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Accesory For Craftsman 12" Woodturning Lathe

Posts

Accesory For Craftsman 12" Woodturning Lathe

#1

Accesory For Craftsman 12" Woodturning Lathe

Grady Fisher

>I am looking for a "Speed Reducer" for a craftsman tube bed lathe of mid 1980s vintage. My Operators Manual listed a Speed Reducer under recommended accessories. Lathe Model Number 113.228162. Catalog No. on "Speed Reducer" was 9-23895. Anyone know anything about this item and where I might find one?

Re: Accesory For Craftsman 12" Woodturning Lathe

#2

Re: Accesory For Craftsman 12" Woodturning Lathe

Bill Hale

>Have you tried Sears online parts dept. ?

Bill in Casa Grande, AZ.

Re: Accesory For Craftsman 12" Woodturning Lathe

#3

Re: Accesory For Craftsman 12" Woodturning Lathe

John Lucas

>Grady The ones that I remember just had a jackshaft mounted below the lathe but they may have been homemade. It's been a while since I saw one of those. The ones I'm thinking about were the round tube lathes.

Re: Accesory For Craftsman 12" Woodturning Lathe

#4

Re: Accesory For Craftsman 12" Woodturning Lathe

Grady Fisher

>Yes I have tried several approaches to Craftsman with no luck to date. A part of the problem is that all I know is a catalog reference in my operators manual and don't have a model or part number to cite.

Thanks, Grady

Re: Accesory For Craftsman 12" Woodturning Lathe

#5

Re: Accesory For Craftsman 12" Woodturning Lathe

Grady Fisher

>Yes my lathe is the round tube type of the 1980s and has only four speeds by changing the belt on the pulleys. I was looking for a way to slow all four options down a little as my slowest speed is 875rpm and the next step up is 1350rpm I would like to slow all four choices down some as I don't think I will ever need the top rpm of 3450. I probably can do it with an intermediate pulley setup, but thought the accessory recommended in the operators manual would be simpler if I could find one. Thanks for your input.

Grady

Re: Accesory For Craftsman 12" Woodturning Lathe

#6

Re: Accesory For Craftsman 12" Woodturning Lathe

Bill Hale

>All Crafstman products have or had a part no.

xxx.xxxxxxxxxxx. The first three are the vendor name and the balance is the item. This is done by division of type of equip.

Ex Sears management and glad of it.

Bill Hale

Re: Accesory For Craftsman 12" Woodturning Lathe

#7

The part number is...

Brian Hahn in SW Wisconsin

>The part number is 149.23895. But I'd be surprised if they still have any information about it after 20 years.

Re: Accesory For Craftsman 12" Woodturning Lathe

#8

Re: The part number is...

Grady Fisher

>Thanks for the information? Do you know anyone that has the speed reducer and would sell it. Grady