Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Meeting Topics

Posts

Meeting Topics

#1

Meeting Topics

Skip Beardsley

>Looking for some good meeting topics for our club. Have you had a really good topic or demo recently which you would like to share?

Re: Meeting Topics

#2

Re: Meeting Topics

john lucas

>Skip Here is a list of topics I'm working on for this years demos. Hope this helps.

Turning Demo ideas

Group discussions

Gadgets and tools that make life easier

Dust collection, dust protection, hearing protection.

Finishing procedures

Reverse chucking

Home made jigs

Grinding systems

Demos

Sharpening

Spindle turning

Hollowing

Deep vessels, shallow vessels, 2 part vessels.

Project

Salt and pepper shaker

Boxes

Paddle turning-turning a flat board

Off center turning

Metal working for woodworkers

Chainsaw safety

Bandsaw safety

Using a hook tool or ring tool

Turing delicate finials for a lid

How to use Inlace and or epoxy

Christmas ornaments

Pyrography

Carving

How to prevent or eliminate tear-outs, or methods to solve or repair tear outs

Box turning

Bird house ornaments

Confetti oil lamp holder or Potpourri box

Re: Meeting Topics

#3

Re: Meeting Topics

john lucas

>Skip Here are some demo's that I've done that seem to be popular

Inside-out turning

Texturing

Dyeing and coloring wood

Basic bowl turning with an emphasis on different grinds on the bowl gouge

Using the skew

Christmas ornaments- 3 part and 2 part ornaments

Turning Banksia Pods

Turning Tagua nuts- Using tagua nut pieces for inlay

Goblet turning

Spit turning -glue ups using paper joints and then fluting with router

Re: Meeting Topics

#4

Re: Meeting Topics

Brian Hahn in SW Wisconsin

>I just gave a demo on inside-out ornaments that was well received. (Only my second demo ever.)

And I just volunteered to give a demo on making tool handles, an often over-looked topic.

Another demo that I've seen that I really liked was turning spheres. (Not that difficult, but intimidating if you've never done it before.)

Re: Meeting Topics

#5

Re: Meeting Topics

RussFairfield

>The all-time favorite demo topics are finishing and anything that has a lot of action and flying shavings. Finishing because it is something that everyone has problems with, and shavings because most people are there to be entertained.

Re: Meeting Topics

#6

Re: Meeting Topics

Sonja Lemon, Sacramento, CA

>Skip, Our club has had a couple of meetings with simultaneous mini demos. Topics such as; metal leafing, dying with aniline dyes, chemical staining, lacquer,finishing with 5 minute epoxy and various sharpening techniques. Groups rotated around the room, stopping at each demo for about 15 minutes. These were very well received because members are able to get up close and ask questions. We've done this type of demos about once a year.

Sonja

Re: Meeting Topics

#7

Re: Meeting Topics

Skip Beardsley

>Thanks to all for responses. Sure are lots of wonderful ideas there. Will help in our planning for future meeting for sure.