Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

lacquer finish

Posts

lacquer finish

#1

lacquer finish

Dennis Taylor

>I have read the Power Buffing post, and I probaby did buff to aggressively for the thin coats of lacquer...and maybe I need to wait much longer.....the lacquer finish is easy to spray but time consuming and the drying temp are hard to determine in N.E Ohio in the winter...is there another spray type finish that can be used that will dry quicker?...I have tried the oil finish and maybe my application of it wasn't correct but it didn't seem to dry, ever!...turn mostly small to medium size items and would like to get a finish that is consistent, if there is such a thing?...maybe the lacquer is best, just need more patience!...Dennis

Re: lacquer finish

#2

Re: lacquer finish *LINK*

Mark Kauder. Phenix City, AL

>They don't come much faster than lacquer.

You say that you sprayed it - are you using a spray gun or a spray can? If a gun, use acetone to thin, it dries faster than lacquer thinner - marginally so, but faster none the less. Try not to spray in temps under 70 degrees - 60 at the lowest. If you have low shop temps, keep the bowl and the lacquer in the house, take them out to the shop, shoot, and then bring the bowl back in - preferably somewhere where the smell will not put you in the dog house.

I good quality lacquer like Behlen's (I prefer their Stringed Instrument Lacquer) will dry much faster than a cheap lacquer. Deft has a retarder in it, and will dry very slow - days and days at warm temps just so you can sand it, much less buff.

Machine buffing is a dangerous business. Most people buff way too fast, and burn/melt the lacquer. I have years of experience sanding and buffing cars, and I hand buff my bowls.

Mark


http://www.markkauder.com

Re: lacquer finish

#3

Mark -- 3M Finesse-It questions

Ed Moore

>Mark,

I am not familiar with 3M Finesse-It, so my question is: Could you charge a Beall buffing wheel with it, say instead of white diamond and get a good result?

And if the answer is yes, is it probably a good idea to lightly buff with carnauba wax AFTER using 3M Finesse-It?

Possibly I am really asking "At what point in the process do you use 3M Finesse-It?

Have you ever used 3M Finesse-It on Krylon Matte Finish - 1311? If so, how were the results?

Thanks,

Ed

Re: lacquer finish

#4

Re: Mark -- 3M Finesse-It questions

Jim Terry

>Ed,

I have used Finesse-It by hand on lacquer which works well if you have the patience. Apply it to a small area at a time and rub out.

Be sure you have enough coats of lacquer and your final sanding did not go through the lacquer. Never tried it directly on a buffing wheel. It needs to be wet when you start buffing.

Jim

Re: lacquer finish

#5

Re: lacquer finish

Thom in Kent,WA

>I have a friend who works for GE, and he says their standards are the GE standard (that stands for Good Enough). Anyway, I paint all of my bowls with lacquer. I use thinned Deft. I purchased at a garage sale a Binks 7 gun that I use. I thin it with 50/50 thinner/lacquer. I turn bowls green and thin and uniform, alcohol soak for a few hours, then I hand slather on this thinned Deft on the outside only. This allows the inside to lose moisture much like Dave Smith's bag method. Usually the next day I begin to wet sand at 1500 and apply coats of thinned Deft. Each day I resand with 1500 wet and apply another coat until I have 4 or 5 coats ( 4 or 5 days ). I spray outside in all temperatures and have had no problems with blushing nor slow drying. I have sprayed at 40 to 80 degress and no problems ( I live by Seattle). After the final coat dries for a day, I wet sand at 1500 and polish with a paper bag. Wax and buff with the bag a couple of times and I am done.This works for me and gives me a GE finish. I am not a super turner so I always have boo boos but these sell well.I hate non drying Urethane.

Re: lacquer finish

#6

Re: Mark -- 3M Finesse-It questions

Mark Kauder, Phenix City, AL

>You can get 3M Finesse-It a any paint shop that carries 3M and supplies the auto paint shops. It is designed to be used either by hand or my slow speed machine buffer after sanding to at least 1500 grit. Though I do not like them as well, you can use most any of the "Swirl" removers available in the car care section of Autozone, and the like.

I advise against using wax over lacquer. Wax is used over automotive finishes to provide a protective barrier against water spotting, tree sap and the like. It is use over oil finishes on wood to provide a (poor) protective barrier of another poor protective finish (oil). It was the best that was available to the "Masters" in the past. Wax will cloud over time from moisture absorbtion, and will collect finger prints. I stopped using it on my pieces, because with just wipe with a soft cloth, the piece looks great again.

I have never used Finesse-It on anything but Lacquer, but I see no reason that you could not use it on any hard surface. It is nothing but a very fine abrasive solution (in the .5-1 micron grit range. Same range as Micromesh 20000.

Mark

Re: lacquer finish

#7

Thanks, Mark.

Ed Moore

>You have given me some things to think about. Certainly your finishes are as good as they come.

Ed