Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

WC benefit auction: Steel Handle Insert (Ferrule)

Posts

WC benefit auction: Steel Handle Insert (Ferrule)

#1

WC benefit auction: Steel Handle Insert (Ferrule)

Ken Grunke from SW WI

>Over on the Benefit Auction board I've listed a tool handle insert, for interchangeable 3/8" shafts. The insert is drilled and tapped for a 1/4-20 setscrew or thumbscrew. It fits into a 1/2" hole drilled in the end of your handle, to be epoxied or CA glued in. Machined from 3/4" diameter cold-rolled steel, 2" long.

This insert is great for the Alan Lacer hook tool, a 3/8" round skew, a pyramid tool, a skewchigouge, or any tool with a 3/8" shaft. The picture below shows the insert next to one of my own handles, holding a double-ended tool--the end showing is a skew edge, and the other has a skewchigouge grind.

The impetus for this auction is from JL, who sent me non gratis a cardboard tube of various types of plastic film which came in handy in more ways than one for my phrugal photo booth. In fact, a piece of metallized film was used for the backdrop surface of the image below. Neat looking, eh? The original plan was for me to just pay for shipping, and when I asked JL what he needed he suggested I make a $10 donation to WC--so this is my attempt at his request.

Thanks, JL, and thanks to anyone who cares to make a bid.


img