Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Delta Grinder - Slow Speed

Posts

Delta Grinder - Slow Speed

#1

Delta Grinder - Slow Speed

Gary Ratajczak

>Hello:

I've been looking at slow speed grinders, and see that the 8" Delta is not available anywhere. Has anyone heard of a replacement coming out???

Also been thinking of going with the Woodcraft slow speed, along with the Oneway Balance kit. Read some archive info that was favorable - any long term comments??

Thanks all

Re: Delta Grinder - Slow Speed

#2

Re: Delta Grinder - Slow Speed

RussFairfield

>The only problem with the inexpensive grinders is that their motor armature may be out of balance, and that is something that can't be solved with the wheel balancers.

Always check the grinder by running it without wheels or collars, and check for vibration. Any movement other than the hum of the motor is too much. Some folks advocate placing a full glass of water on the bench next to the motor. If there is a ripple of the water, there is too much vibration in the moror.

If there is a problem, there is an advantage to buying from the store rather than the catalog. Most Woodcraft stores will let you run a grinder before purchasing.

Re: Delta Grinder - Slow Speed

#3

Re: Delta Grinder - Slow Speed

Gary Ratajczak

>Thanks for the advice - I have a local Woodcraft.

Re: Delta Grinder - Slow Speed

#4

Woodcraft should still carry them...

Peter Teubel

>I know we still have them in Woburn, MA. Just sold 4 of them Sunday.

FYI: The stock white wheels that come with the Woodcraft grinder will *NOT* work with the Oneway balancing system. The system requires a wheel with a 1" diameter hole and the stock white wheels have something like 3/4" hole (after taking out the plastic bushings). The replacement wheels that Woodcraft sells do have a 1" bore so they work fine.