Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Arizona roundup question

Posts

Arizona roundup question

#1

Arizona roundup question

ken chase

>This is for those who attended. I was impressed with the Elbo hollowing system but lack experience with hollowing rigs and lazer. Opinions about this product will be appreciated. My instinct is to order one but I could use some imput from more experienced turners who saw the demo.

Thanks

Re: Arizona roundup question

#2

Re: Arizona roundup question

Jennifer@Indy.USA

>Ken, as I was clicking through the pictures of the Round up Weekend I saw the pic of the Elbo booth and was intrigued. I too would love to see some more info on this rig. I just did a Google search but nothing came up?

Jen

Re: Arizona roundup question

#3

Re: Arizona roundup question

ken chase

>Jennifer:

They apparently don't have a website.Staninvent@cox.net is the e-mail address. Did you see the demo?

Re: Arizona roundup question

#4

Re: Arizona roundup question

Jennifer@Indy.USA

>No Ken sadly I wasn't able to go, but I saw it in the picture and it's a hollowing rig I've enver heard of, so I'm interested in any information out there.

Jen

Re: Arizona roundup question

#5

Re: Arizona roundup question

Paul in Phoenix, AZ

>Hi Ken,

I looked pretty good to me. If I didn't already have several hollowing setups, I would be interested in giving it a try.

Re: Arizona roundup question

#6

Re: Arizona roundup question

ken chase

>Thanks Paul....That's a good enough endorsement for me.

Re: Arizona roundup question

#7

Re: Arizona roundup question

Bill Hale

>Ken

I purchased one and had a little problem, It broke.

I took it back on Sunday and they happily exchanged it. Stan told me at that time it looked like the welder had used the wrong tig material.

Monday I set up the second one and it broke, the same problem.

Good news ir that I spoke with Stan today and they are going to send me another with a different weld material and there should be no problem.

I spoke with him about a small design change and they are going to do it.

I would order it again and think the design is good.

If you order ask for the redesigned mount.

These seem like great people who want to have a great product and happy customers.

Good turning and be safe

Bill in Casda Grande, AZ.

Re: Arizona roundup question

#8

Re: Arizona roundup question

Bob Rogne WestMacTurning

>I watched five or six demos and just had to get one. Used it Monday and today and could not be more happy. I missed the demo on how to tighten it up but it was not a problem.

They should have a printed sheet on how to set it up. But no big deal.

They were out of scrapers but said would ship ASAP.

It is a great system for those off us that are not at it all the time.

Bob R WestMacTurning

Re: Arizona roundup question

#9

Re: Arizona roundup question

Jennifer@Indy.USA

>Can I ask how much they're worth?

Thanks :)

Re: Arizona roundup question

#10

Re: Arizona roundup question

Paul in Phoenix, AZ

>Jen, I think it was in the $200 range. But Bill or Ken could tell you exactly how much.

Re: Arizona roundup question

#11

Re: Arizona roundup question

ken chase

>With all the extras about $250.00

The reports so far indicate to me a buy.

Hope there are more posts to follow.

Thanks to all