Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Question for the wood burners in the group

Posts

Question for the wood burners in the group

#1

Question for the wood burners in the group

Mike Rubes, Apex, NC

>Hi all,

Does everyone free hand draw their designs? What if you have a pattern and you want to get that pattern on the piece and then burn the drawing? Namely, I've got a symbol I'd like to burn in the bottom of a bowl for a friend, but I've no idea how to transfer the design to the wood before I burn it. I will attempt to draw it, but if someone's got a neat-o method of transfering a design from a printed page to the piece, I'd love to hear it.

Here's a pic of the symbol if you were interested.


Thanks!

Mike

The sweet(?) smell of burning wood permeating the shop in Apex, NC...

Re: Question for the wood burners in the group

#2

Re: Question for the wood burners in the group

Mike Schwing from Md.

>There are plenty of good options here. One is an ink jet print/thermal transfer. Woodcraft and most of the woodcarving shops online carry what is needed. The other is what I used for the design I burned into the piece below - simple graphite paper I bought at Michael's crafts store. Slipped it under the design I wanted, traced it with a pen, and the outline was left on the workpiece. Cheap, works great.


Re: Question for the wood burners in the group

#3

Re: Question for the wood burners in the group

Carole Valentine

>You can use heat transfer. Print out the design on a laser printer (not inkjet), put it face down on the wood and go over it with a hot iron. I use a small round disk that comes with a cheap Walmart burner I had from years ago to go over the pattern. The heat will tranfer the toner to the wood.

Re: Question for the wood burners in the group

#4

Re: Question for the wood burners in the group

OB OBrien In Pensacola

>Another method similar to Carols is put the laser printer image ink side down on your wood and rub it hard with a prismatic color toner or color balancer pen. This pen has Zylene in it and will cause the ink to release onto the wood.

Re: Question for the wood burners in the group

#5

Re: Question for the wood burners in the group

Mike Rubes, Apex, NC

>Hi all,

Thanks for the great suggestions! I had no idea I could transfer it from the printer and hadn't heard of graphite paper.

Fun stuff, guys, thanks!

Mike

Re: Question for the wood burners in the group

#6

Re: Question for the wood burners in the group

Rick Allen

>They even make graphite paper in different colors. You might want to use white on a dark wood.

Re: Question for the wood burners in the group

#7

Re: Question for the wood burners in the group

John Lucas

>Mike for us old guys it's called Carbon paper. They still sell it in art supply stores.

If you copy an image it will be in reverse when you transfer it using the iron or xylene. Lacquer thinner applied on the back of the paper will also release it. I use a paper towel that's been dipped in the lacquer thinner but a Q tip might also work just as well. In photo shop I can flip the image before printing it out so that the letters will be correct when you iron it on. You can also get T shirt iron on programs that flip the image.

Re: Question for the wood burners in the group

#8

Re: Question for the wood burners in the group

don lewonczyk

>Mike,other way if you want, you can use some temperary spray adesive to the back side of your printed paper, let it dry,when it doesn't stick to you finger postion it on it on your piece and lightly go over you pattern with the wood burner burning through the paper. Use a heat gun or hair dryer to release pattern from wood. Mineral spirts will clean up the adesive. It's quick and easy, won't slip if your tracing and burning through the paper you'll get all the lines where you want them and won't have carbon smears to worry about. Now you have a range of options all are good and all will work. Have fun burning. DonL

Re: Question for the wood burners in the group

#9

Boy, do I feel dumb!

Molly Winton

>I always did it the low tech way of cutting and tracing..........why do I admit this to you people??? Bless you Mike for asking this question.

Re: Question for the wood burners in the group

#10

Re: Question for the wood burners in the group

Dick Anderson

>Heat transfer of a xerox or laser jet copy using a shading tip on the woodburner can result in some scorching of the wood if you are not careful, particularly if it is a light colored wood. Also, you can transfer the xerox or laser jet copy using acetone. I have done that successfully many times applying the acetone with a q-tip. In this type of transfer you must go over the acetone with a credit card (or something similar) to press the toner onto the wood. When you do the transfer by whatever method, tape the pattern down in such a way that you can lift a portion to check the quality of the transfer and be able to return the pattern to the exact location. If you use a 'carbon paper' make certain that it is graphite and not carbon. Graphite can be erased.

Re: Question for the wood burners in the group

#11

Re: Question for the wood burners in the group

Ed Karch

>I just learned a new one in my drawing class. Just rub drawing charcoal over the back of your printout tape it down on your target and trace. any carbon smudges can be easily erased. makes nice black lines. I have tried the acetone and found it to be a bit blurry as the toner soaks into the wood. If you need to erase on wood a light scraping works better than an eraser.

Re: Question for the wood burners in the group

#12

Peter Charles Fagg (UK)

Re: Boy, do I feel dumb!

Peter Charles Fagg (UK)

>Thanks Molly, I didn't have the courage to be the first to admit to this method!!!

Regards Peter

Re: Question for the wood burners in the group

#13

Re: Question for the wood burners in the group

RussFairfield

>I have never burned anything except what goes into the burn barrel to destroy the evidence, but I have a friend who carves animals and birds. He has a detailed logo that he prints onto the sticky-back transparency film, sticks that to the wood and then burns the wood through the film.

Someone has already mentioned the adhesive paper, but Bill says the clear film works better because it has a lower melting point and doesn't burn.

Re: Question for the wood burners in the group

#14

Re: Boy, do I feel dumb!

John Lucas

>Molly I can't draw. Well actually I'm getting better. consequently Ihave tried all sorts of ways to get images on to wood. I used to shoot the images with my camera. make a negative or slide and then project it the size that I wanted and trace it.

then when I worked for Xerox I started copying things and sizing them on the copier. I would tape it down and poke tiny holes through the original to give me a guide for burning or carving. It was about this time that I started using carbon paper. They also have something some graphite or similar paper to carbon paper at sewing centers and art supply stores.

Then I started using the acetone to "melt" the toner on copiers. I haven't played with a lot of printers yet and don't know how the ink transfers on them.

Basically if there is a will there is a way to do it. \

by the way I loved the piece your entering into the Step up to the plate exhibition.

Re: Question for the wood burners in the group

#15

Re: Boy, do I feel dumb!

Molly Winton

>Thanks John. I can't tell you how many HOURS I've spent cutting and tracing very intricate designs (NW Coastal Indian designs) on pieces. I feel like such a dunce! Oh well, this is one reason I love this forum. I learn new tips, and folks can get a good laugh.

Re: Question for the wood burners in the group

#16

Re: Question for the wood burners in the group

don lewonczyk

>Russ your right about transparent film with the sticky side, I didn't mention it because it's $1.00 per sheet unless you buy 50+ to get a break on price. I use mine for odd shapes,egg carving etc, with a high speed engraver. The paper way I use on flat work that needs detail burned on. Anyway it's worked for me for 20 years. DonL

Re: Question for the wood burners in the group

#17

Hey Molly......

Barry Irby

>All those beautiful pieces you have made and all those hours and now you learn some new ways? Wow. I am anxious for you to try some of these ideas and show us what you can do. I have had a couple of DUH! moments here myself. Thanks for fessing up. Makes me feel better. Go practice and show us some new stuff.