Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Powermatic Guard

Posts

Powermatic Guard

#1

Powermatic Guard

Rick Davenport

>Does anyone use the guard on their Powermatic?

I am safety conscious and I do wear a face shield and safety glasses and now have a dust collection system, but I can't bring myself to use that big old guard. When it is down it just seems to get in the way.

So far I have kept it in the up position and clamped a swing lamp to it and bungied my dust collector hose to it.

comments?

Rick

Re: Powermatic Guard

#2

Unless you are looking through the guard it is not

T Daniel

>protecting you. If a bowl comes off and is sailing away from you why would you want to turn it around and send it back into your face?

The guards only protect someone else in the room, they do little to protect the operator. It is a liability thing and is there to protect the manufacturer of the lathe, not the operator of the lathe.

Toss it.

TD

Re: Powermatic Guard

#3

Re: Unless you are looking through the guard it is

Bill Dotten

>THE USUAL RESPONSE IS THAT YOU SHOULD DISPENSE WITH IT.

I HAVE BEEN BANGED ON THE HEAD AND I HAVE SEEN HOLLOW FORMS BLOW UP. i KEEP IT AND I USE IT ON LARGE UNBALANCED BLANKS, ON PUNKY WOOD AND ON WOOD WITH SUSPECTED SPLITS. WHY BE A MACHO GUY IN THOSE SITUATIONS. NO ONE WILL SEE ME USE IT OR CALL ME A SISSY AND IT REALLY DOESN'T GET IN THE WAY. I DO NOT USE IT ON SOUND, WELL BALANCED, SPLIT FREE WORK, BUT I WEAR A FACE SHIELD. TRUST ME WHEN I SAY THAT THE FACE IS WELL SUPPLIED WITH BLOOD

BILL

Re: Powermatic Guard

#4

Never been unwrapped.

DougJ in Crawfordsville, IN

>Still sitting on the floor in the wrapping below the lathe.

Re: Powermatic Guard

#5

Re: Never been unwrapped.

john lucas

>Mine too.

Re: Powermatic Guard

#6

Re: Powermatic Guard

jared

>remove 1 for email

Hello: I dont use the guard, it is out in my garage and has never been unwrapped. I did just find a real good use for the bracket for the guard that is on the back side of the headstock. I got a 3/4 inch rod, drilled a hole in it so the little spring pin in the bracket would lock the rod in place in the bracket. Then I made another bracket that would slide on the rod and attached my dust collector hood to that bracket with a bungee cord. It works real good, and with it, the dust collector hood can be turned and twisted anyway it needs to be to get in line with most of the dust that comes off my sander, regardless of what the ofjects shape is. I made the hood out of an aluminum shroud from an old heat lamp that years ago was used in my dads hog house to keep little pigs warm.

Jared

Re: Powermatic Guard

#7

Re: Never been unwrapped.

Norm Smith in Nova Scotia

>Me also. Its a waste. Only adds cost to shipping weight.

Norm

Re: Powermatic Guard

#8

Re: Powermatic Guard

Bob Persing (Skillman NJ)

>Rick,

I too do not use the Powermatic lathe guard but do consider myself reasonably safety conscious in most of my activities within the workshop. I do not consider myself a highly experienced turner by any stretch of the imagination so I have occasionally placed a bit of excessive stress on a piece being turned to only have it release itself from the chuck or to break free from a glue block. No injuries at all and I never considered that the missing guard would have provided me with any improved protection.

What I have learned is to �read� the wood being turned a little better (extreme caution if you are trying to chuck punky or soft wood!!!) �listen� to the wood as you turn (the sudden arrival of a tick-tick-tick sound as you turn demands investigation). For me, education, experience and caution will add considerably to my safety in my home workshop.

Perhaps the included guard is more appropriate in a classroom situation where there are several lathes positioned in an open area.

Above is just one persons opinion and experience...be safe.

BobP


img

Re: Powermatic Guard

#9

Re: Powermatic Guard

RPE

>I use mine every time I turn. I don't even notice it. I look past it while I'm turning. I wear a coat, hat and gloves when it is cold also. I don't care if those around me aren't wearing their coats or hats. If I'm cold I put more clothes on. I also wear my seat belt when I am in a car, driving or not. It might help. I don't want to find out the hard way I should have used it.

Re: Powermatic Guard

#10

Powermatic Guard,,,jared

DougJ in Crawfordsville, IN

>You have a picture you could post?

Re: Powermatic Guard

#11

Re: Powermatic Guard,,,jared

jared

>I will try to get a couple of pictures taken this afternoon and put them up tonight if I can figure out how to resize them. I have never posted a picture here before. Jared

Re: Powermatic Guard

#12

Re: Powermatic Guard *LINK*

JKJ in East TN

>Rick,

This gets asked periodically! I asked once myself, link below. A quick search of the forum here gave these other threads:

http://www.woodcentral.com/cgi-bin/archives_turning.pl?read=42449

http://www.woodcentral.com/cgi-bin/archives_turning.pl?read=79221

JKJ


one thread

Re: Powermatic Guard

#13

Re: Never been unwrapped.

Craig Daymon

>One more for the still unwrapped. Besides, if I unwrapped it the bubble wrap might lose its shape!