Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Oops! Sorry Boss!

Posts

Oops! Sorry Boss!

#1

Oops! Sorry Boss!

Carole Valentine

>I noticed that the little piece of Squarebark Euonymus that Ellis sent me was developing some checks so I decided to turn a HF egg-shell thin while it was green and let it dry from turning and sanding. Guess I over-estimated thin. Thin green doesn't have the same sound as thin dry! LOL

Dang..that was going to be a pretty little HF too! A white wood much like holly. :( Oh well, it was fun while it lasted!


img

Re: Oops! Sorry Boss!

#2

You'll have that!

T Daniel

>

Re: Oops! Sorry Boss!

#3

Re: Oops! Sorry Boss!

Rick Davenport

>They were just talking about you in the chatroom Carole.

Said you never had anything fly off the lathe!

They must have ruined your kharma!

Rick

Re: Oops! Sorry Boss!

#4

That's it!!!

Carole Valentine

>It's all their fault! All their fault! LOL

Re: Oops! Sorry Boss!

#5

Still don't get that phrase

Carole Valentine

>Is that the same as "*stuff* happens"? Going to have to learn "Georgia Speak" before April.

Re: Oops! Sorry Boss!

#6

Re: Still don't get that phrase

Bill Crommett

>Carole: If you intend to learn "Georgia Speak" before April you had better start last April. They have funny way of combining Atlanta "metrospeak" with the North Georgia "Hill Speak".

Re: Oops! Sorry Boss!

#7

Re: Oops! Sorry Boss!

Jake Niedling

>Carol - That picture looks like it came off my lathe. That is usually where I get bit making a hollow form in the transition curve. Now I don't feel so lonely. LOL

Re: Oops! Sorry Boss!

#8

and if we don't have a phrase for something..

T Daniel

>we don't hesitate to make up one. :)

Re: Oops! Sorry Boss!

#9

Looks like a goblet cup to me :>)

Phil Joines

>

Re: Oops! Sorry Boss!

#10

Re: All is not lost

RussFairfield

>Trim both ends, glue them back together with a layer of contrasting wood between them, call it a "layered form", and tell everybody that you intended it to be that way

Re: Oops! Sorry Boss!

#11

Re: All is not lost

Carole Valentine

>Russ, that may have been an option before I cut it in half vertically! I wanted to see how I was doing with thickness in the shoulder area. Not bad at all, but now I know I need to work that area a little thinner. So, an "oops" was turned into an "ah hah!"

Re: Oops! Sorry Boss!

#12

Ah ha! That is how you invented slip ring bowls.

Dave Smith

>

Re: Oops! Sorry Boss!

#13

Re: All is not lost

RussFairfield

>So put in another piece of wood in both directions.

Re: Oops! Sorry Boss!

#14

Design opportunity?

Paul Porter in Phoenix

>

Re: Oops! Sorry Boss!

#15

The rule is...

Dale Sherman - Pompey/Manlius, NY

>...you're supposed to keep the inside diameter smaller than the outside diameter. Now you've seen the results when one exceeds the other. Thanks for sharing, now you have no reason to hesitate trying Russ's suggestion and put in a contrasting wood in both directions. Worst that could happen is you would still have firewood.

Dale