Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Pool cues?

Posts

Pool cues?

#1

Pool cues?

Edward J

>Was introduced to this site from a sales guy at Lee Valley Vancouver, CND. It'll take me a while to sort through this massive amount of info and links, but what I'd like to know is has anyone got experience with turning pool cues?

I've got a Crafstman 12" lathe that I bought in the '80's when I was 16 or so, but the bed is only 32" long. I've got a Nova chuck, and have made a home-made lathe steady, but have no idea how to go about starting this project, such as suitable wood types, mounting the screw-in connector, and most importantly, maintaining a dead accurate and straight product. Any suggestions?

Re: Pool cues?

#2

Re: Pool cues? *LINK*

JKJ in East TN

>A thread a few weeks ago discussed this. Link below. You might also search for older messages.

JKJ


turning pool cues thread

Re: Pool cues?

#3

Re: Pool cues? *LINK*

Ryan Dicker in Renfrew, Ontario

>Hi Ed,

I too was thinking of undertaking this project. I've gathered that in order to prevent the narrow pieces from whipping, you'll need what they call a steady rest. Put simply, it is 3 rollerblade or skateboard wheels mounted in a circle to hold the piece. I included a link at the bottom of this message to Oneway's steady rest for some more info on that. I'm not sure if they are available for the Craftsman, which I'll assume is a tube lathe, but if you make another thread on the subject, someone may be able to give you more info on that.

A good place to order the materials for the cue is Cuestik.com. Do a search on Google for Turning Pool Cues or Making Pool Cues and you should find a few pages with some more information. Also try searching in Google under Groups, lots of good info in there.

Hope this helps,

Ryan


http://www.oneway.on.ca/steadyrests/spindle_steady

Re: Pool cues?

#4

Re: Pool cues?

Phil Joines

>Steadys are easy enough to make to fit your lathe. A search for "steady rest" will show a number of threads about them.

Re: Pool cues?

#5

Re: Pool cues?

Edward J

>Wooah, 154 posts in one day? I'll be spending more time in front of this box than turning! Didn't expect this kind of info so fast, thank you gentlemen, it'll take me awhile to digest all of this stuff.