Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Spindle gouge sharpening

Posts

Spindle gouge sharpening

#1

Spindle gouge sharpening

Terry in Ottawa

>My spindle gouge is getting very pointy with my sharpening method. I'm using a home made Wolverine jig. I'm getting a nice consistent bevel, I think, but the tip seems too pointed. Should it be more rounded and if so, do you have any suggestions what I should do?

In addition to my 6 inch grinder I also have a 1 inch belt sander.


img

Re: Spindle gouge sharpening

#2

Re: Spindle gouge sharpening

Jennifer@Indy.USA

>Terry, could you also show us a picture of your sharpening setup? That might help determine why this is happening. It appears that you're just not grinding enough off the front of the tool? When I'm grinding a new tool for the first time or reshaping one....I like to get the bevel on both of the sides worked out first...then work the font of tool to blend them together. I'm not sure if this is the appropriate way to do it....but it seems to work for me. Hopefully other's will chime in here.

Jennifer

Re: Spindle gouge sharpening

#3

Re: Spindle gouge sharpening

Terry in Ottawa

>Hi Jennifer. Sure no problem posting a picture of my grinding set up. Hope it helps.


img

Re: Spindle gouge sharpening

#4

Re: Spindle gouge sharpening

Terry in Ottawa

>And here's a another view


img

Re: Spindle gouge sharpening

#5

Re: Spindle gouge sharpening

john lucas

>Terry You just have to grind longer on the nose and less on the sides. The jig decides the general shape but the grinder will still remove metal and lower places changing the shape. Try touching just the nose and going back and forth across is a few times until it looks more like you want.

Re: Spindle gouge sharpening

#6

Re: Spindle gouge sharpening

Barry Turner

>You need a Oneway vari-grind jig, or the homemade equivalent of one.

Re: Spindle gouge sharpening

#7

Re: Spindle gouge sharpening

adrien

>Trouble with the varigrind on spindle gouges is that when they get short, the varigrind jig can't be effectively use. Try John Lucas' ideas first

Re: Spindle gouge sharpening

#8

Re: Spindle gouge sharpening

Vicmarc.fan

>When you are more comfortable with your jig you will find the sides take more grinding than the nose because there is more "meat" to remove there. When you get the sides even start to round the nose by swinging the handle to form the shape you want, don't go up the sides again or you will get that point again.

Ron

Re: Spindle gouge sharpening

#9

Re: Spindle gouge sharpening

john lucas

>Following up on Ron's suggestions, I do a double bevel on my spindle gouges. I grind away the thickness at the bottom of the bevel. This leaves less "meat" on the sides to grind and makes grinding the tool easier. It also allows the tool to get into tighter areas. This is especially true with spindle gouges that are really thick in the bottom of the flute.

Re: Spindle gouge sharpening

#10

Jim DeLaney, Austintown, Ohio

Re: Spindle gouge sharpening

Jim DeLaney, Austintown, Ohio

>Terry,

I just emailed you a PDF file of JeanMichel's gouge grinding attachment - similar to the Vari-Grind. Hopefully, it'll work well for you.

Jim D.

Re: Spindle gouge sharpening

#11

Re: Spindle gouge sharpening

ben d.

>This is a wolverine web site that you can download and it gives instructions for grinding various tools. At least you can look at what is going on plus some instruction. Hope it helps.

http://www.oneway.on.ca/multi-media.htm

Re: Spindle gouge sharpening

#12

Re: Spindle gouge sharpening

Ed Moore

>I recommend a simple jig that Peter Toch makes for use on a spindle gouge. They work great and are not expensive. Contact Peter privately.

Re: Spindle gouge sharpening

#13

Re: Spindle gouge sharpening

Don Henthorn

>I agree with John and all. The jig just gives you repeatability. You determine the shape by how much and where you grind.

Re: Spindle gouge sharpening

#14

Try it you may like it. *LINK*

Bob Fawcett

>I have a spindle gouge I bought from Lee Valley with almost the same profile. I am a beginner, maybe its not supposed to be this way, but look at the link below. I can't post the direct link to the photo as its a java script. clik the view link on this link and look at the spindle gouge.


Lee Valley P&N gouge.

Re: Spindle gouge sharpening

#15

Re: Spindle gouge sharpening

Terry in Ottawa

>I received a lot of help in resolving this problem. I will try building a Vari Grind type jig. But I also went back to my grinder and concentrated more on the tip instead of just rolling the gouge constantly. I think the results are more in line of what I'm looking for.

Thanks for all the help.


img

Re: Spindle gouge sharpening

#16

Re: Spindle gouge sharpening

Jim Shaver - Oakville, Ontario

>That's Looking better Terry,

I use a more swept back grind similar to the finger nail profile.

Try this grind you have now and see if it works for you.

take care,

Jim