Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Introduction

Posts

Introduction

#1

Introduction

Wayne Kuhn

>Hello, I�m the new guy here.

My name is Wayne and I am a turnaholic, there I said it.

I have been woodworking as a serious hobby since 2000.

I joined a wood turning club (Baltimore Area Turners ) last year and have sliding down that slippery slope ever since.

I have spent many $$ on my hobby in the past, however since I just upgraded my lathe from a sears mono-tube to a Grizzly G0462. Things have gotten worse. So I thought I would come here for some help to control the urges. I can�t go into my shop with-out at least turning a pen or just making wood chips fly with my practice scraps. My tablesaw, jointer and planer are getting jealous. I fear they are planning an intervention. BTW, my wife (LOML)is an enabler, she let me purchase my new lathe as a birthday present a month in advance and I have not heard a peep about the other purchases that followed.

I have really enjoyed reading the posts here and have gained a lot of useful info. None about how to quit this addiction. Are you all enablers also?

I really have an urge to post other info here about myself, my lathe and other projects.

I need help.

Re: Introduction

#2

Hi Wayne!

Molly Winton

>Enablers, hell! We're fellow addicts. You'll get no help here on ways to curb your addiction. You have fallen into the turning abyss with no way out. Just enjoy the ride, and WELCOME!

Re: Introduction

#3

I confess.....

Jennifer@Indy.USA

>....I am an enabler, Wayne. You'll get no help from me to control your turning urges :)

We're all thrilled to have another adict in the group!

Welcome!

Jennifer

Re: Introduction

#4

Re: I confess.....

Bill Crommett

>I can't help you kick the addiction, but doing as I did yesterday will slow you down for several days or longer. I tried to run a short scrap through the jointer, and the front edge cought and back-fired and gave me a good sprained wrist and now my right hand is swollen so I cannot hold a gouge comfotably. I hope that it will be healed by the last week in April so I don't have to just stand aroud at Terrys and watch all you good people make shavings.

Re: Introduction

#5

Re: Introduction

john lucas

>Wayne Welcome to the madness. Start doing inside-out turning or segmented work and your table saw and planer won't get as lonely. Plus there are more tools that you would "need" for this.

Re: Introduction

#6

Howdy, Wayne!

Carole Valentine

>Welcome to the group! We're all addicts and there is no help for it, so just accept it and enjoy. You won't find a better group of fellow addicts in the land. We'll do everything we can to make sure you don't kick the habit. :)

Re: Introduction

#7

Re: Introduction

Chris K in MD

>Gald you hopped in Wayne, and congrats on the new lathe!

Everyone, Wayne is an accomplished woodworker he made an incredibly beautiful lathe cabinet for our club lathe. We have to get a picture of it on the website soon its amazing work.

People of the BAT cave are coming, we talk about this board every meeting and its bringing them in.

Re: Introduction

#8

Re: Introduction

Chris K in MD

>Our new webmaster is way ahead of us, he posted a picture of it here. Wayne you should be very proud!

http://www.baltimoreareaturners.org/gallery/dispimage.asp?id=18

Re: Introduction

#9

Re: Introduction

Allen Neighbors

>Hello, Wayne, and Welcome!!

I'm relatively new, also, and have learned a bunch from this bunch of GREAT PEOPLE. You have come to the right place.

Be an Addict, Make and Addict, and Give an Addict some wood. That seems to be the attitude of the folks on this forum. :o))

Allen

Re: Introduction

#10

Re: Introduction

Jill

>Welcome aboard Wayne. Your are in deeeppppp trouble here. As all have confirmed we are addicts of turning. Happy Turning, Jill

Re: Introduction

#11

Re: Introduction

Lan Brady

>Wayne,

There is no 12 step program to get you past this addiction!!!

Thank goodness!, Lan

Re: Introduction

#12

Re: Hi Wayne!

Wayne Kuhn

>Oh well, can't say I didn't try. If I can't beat it I may as well enjoy the ride. BTW Chris, I may have a fix for the uncooperative casters I put on the Lathe Cabinet.

Thanks to all for the warm welcome.

Re: Introduction

#13

Re: Introduction

Rick Davenport

>Let's face it Wayne,

You have a problem.

This is the place to deal with it.

Rick

Re: Introduction

#14

Buy a tool

Phil Joines

>That sounds like an excuse to pick up a captive boring bar. :>)