Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Velcro / hook material

Posts

Velcro / hook material

#1

Velcro / hook material

Doug

>Some time back I purchased a sheet of the hook side for the H & L disks. I cut 2" circles

of the material and glued them on to my pads where the hook material had worn and would no longer hold. After some remodeling in my shop I can no longer find the remainder of the sheet. Not only that but I can not remember where I bout the material.

Anyone know where I can purchase this material.

Doug

Re: Velcro / hook material

#2

Re: Velcro / hook material

David Lykins - Marietta GA - guitardude

>Try your local fabric or arts and crafts shops, they usually sell velco (Hook and Loop) material.

Good luck!

Re: Velcro / hook material

#3

Re: Velcro / hook material

Doug

>Thanks David - but the mateial found in the local craft stores is not nearly heavyduty enough. The material I had previously purchased was of an industrial quality.

Re: Velcro / hook material

#4

Re: Velcro / hook material

Dennis Y

>I bought some from Bruce Hoover at a turning show. Can't find url now, sorry Dennis

Re: Velcro / hook material

#5

Re: Velcro / hook material

Allen Neighbors

>I did a search for you. Dennis Hoover's Website is:

http://www.brucehoover.com Once you get there, it's easy to find.

Click on the Contact link in the lower left, and you'll see his telephone number and email address.

Hope this helps.

Allen

Re: Velcro / hook material

#6

Big Box stores...

Peter Teubel

>Home Depot & Lowes have 2" wide "industrial" velcro. When I repair my disc holders, I don't depend on the stock adhesive on the velcro. I use "emblem cement" from Autozone. Tenatious grip.

Re: Velcro / hook material

#7

Re: Velcro / hook material

Don Henthorn

>Woodworkers Supply has a kit which includes a couple of sheets of heavy duty stuff to repair the pads on orbital sanders. When I bought the kit several years ago it was about $11.00.

Re: Velcro / hook material

#8

ps.

Don Henthorn

>Should have mentioned that the material is self stick and works well.

Re: Velcro / hook material

#9

Re: Velcro / hook material

Brian Hahn in SW Wisconsin

>I found the 2" wide "industrial" grade Velcro at Jo-Ann Fabric, priced by the yard (or inch if you prefer).

Re: Velcro / hook material

#10

Klingspor

Dave Smith

>

Re: Velcro / hook material

#11

Found it

Doug

>Thanks all for good advise. Fortunately I found the lost material. I purchased it from Woodmaster Tools, Inc. in a 4' by 138" self adhesive roll. It is used on drum sanders and is fairly expensive - $26 for the roll. I think that figures out to around 5 cents a sq. inch.

Thought I would sell some to local club members.

Thanks again - Doug

Re: Velcro / hook material

#12

Re: Velcro / hook material

Dennis Y

>Thanks Allen, Wife had just driven up and had to get supper on the table. Such is the hard life of a househusband ;} Dennis

Re: Velcro / hook material

#13

Re: Velcro / hook material

John Leonard

>Look in the sewing section of Walmart. They have an industrial strength in 2 inch by 5 foot for about $6.50. I also stick the two parts back to back to make a pad to go between the mandrel and the paper. Works great and is much cheaper than the little pads they sell.

John Leonard