Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Plans for tilting tailstock 3520

Posts

Plans for tilting tailstock 3520

#1

Plans for tilting tailstock 3520

Earl Eyre

>Awhile back I downloaded or saw in a magazine plans for a platform that bolted on the end of a 3520. You could slide the tailstock onto it and then tilt it out of the way. I'm ready to build it and lost the plans. I've looked and searched every site I can think of to no avail. I think I can re-invent it but I would much rather go with a proven design. Can any of you point me to it?

Earl

Re: Plans for tilting tailstock 3520

#2

Re: Mine for a 4224 was pictured in Am. Woodturner

Al Crandall (NE of Indy)

>I have no plans available, but I designed one for my PM4224. There are two pictures in the tips page of American Woodturner magazine, and there are six pictures and appropriate dialog in the July meeting pictures of our club's web page. Check out www.cicaaw.org and click the link to meeting pictures in the upper left corner of home page.

Re: Plans for tilting tailstock 3520

#3

Re: Mine for a 4224 was pictured in Am. Woodturner

john lucas

>Earl I've seen a lot of ways to do it in the last year or so and Al's is the best one I've seen. JOhn

Re: Plans for tilting tailstock 3520

#4

Bingo!

Earl Eyre

>That's the one! Age has a funny way of distorting the memory. Here I thougt I found it on the web and it was in the Tips section of American Woodturner. Thanks, Al. Guess I still have to figure out my own dimensions and measurements! LOL.

I plan to go to work on it tomorrow. Thanks again.

Earl

Re: Plans for tilting tailstock 3520

#5

Re: Mine for a 4224 was pictured in Am. Woodturner

Mike Brazeau

>Al.

Thanks for the link. You have an excellent website at CI. I was going to email you and ask for more information after seeing your article, but never got back to it. I am going to investigate it for my 2436. I might use my outboard more often if I didn't have to do my exercises every time I want to remove the tailstock. I have clipped your photos and text and pasted into a Word document as well as printed to a pdf. File is about 400 kb. Could send you a copy if you wanted.

Mike

Re: Plans for tilting tailstock 3520

#6

Re: Plans for tilting tailstock 3520

Vicmarc.fan

>Here is a picture of one made for the Vicmarc shortbed. May be some ideas here.

Ron


img