Waiting for the truck.....
Rick Davenport
>PM3520b to land today!!
It's supposed to be here between 10 and 2
And it's already 10:27
Where in the heck are they???
Anybody want to help put this thing together???
Rick
Edmonds, WA
Knowledge You Can Build On — Est. 1998
Waiting for the truck.....
Rick Davenport
>PM3520b to land today!!
It's supposed to be here between 10 and 2
And it's already 10:27
Where in the heck are they???
Anybody want to help put this thing together???
Rick
Edmonds, WA
Re: Waiting for the truck.....
David Breth
>If you can wait unit May or June and I'm visiting the in-laws, I'd be glad to escape for an afternoon or four days to help you....
Re: Waiting for the truck.....
Bernie
>If you help me with my 4224 that just came
Cleveland, OH.
a nice 20 degrees today
Re: Waiting for the truck.....
Dick Hines
>Not much butting together to it. Get it off the palet and take the box off. Then plug it her in and turn away. If you have the 220 line already in.
Re: Waiting for the truck.....
Kurt From Jersey
>I received mine about 2 weeks ago! It came totaly unassembled! Kinda made it easier!
Re: Waiting for the truck.....
LT
>Same here...the legs came unattached. The headstock, toolrest and tailstock were on the bed. Took off the tailstock and toolrest and headstock. The headstock is more awkward than heavy (but it is heavy!)
Flipped over the bed, bolted on the legs. A neighbor help me get it right side up and into position. Slide the toolrest, tailstock and headstock back on and you are good to go.
It a great lathe...you will not be disappointed.
Re: Waiting for the truck.....
Rick Davenport
>WooHoo!
It arrived at 1PM.
I've done everything I can -
unpackaged, removed head and tail stocks, attached legs, connected the plug.
Now I'm waiting for a couple of friends to come by and help me get it upright.
I had to bribe them with wine and snacks, which means I probably won't turn any wood until tomorrow.
Rick
"Life shouldn't be dull."
I managed to get my 352# Rikon bandsaw up
steve antonucci
>by myself...
Lots of levers and physics. I couldn't wait...
Steve