Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

What a great afternoon!

Posts

What a great afternoon!

#1

What a great afternoon!

Gary Evans Tallassee, TN

>It was my pleasure yesterday to spend the afternoon with our own JKJ; A.K.A. John K. Jordan at his ranch near Clinton, TN. I was finally able to deliver some hickory lumber to John that I had been promising him for several months.

Once I got there, we had the opportunity to play with his new LT 15 Woodmizer. I had brought some respectable chunks of Slippery Elm, and a big Bradford pear crotch with about 5 branches in it. We proceeded over the course of a couple of hours to slab everything into 3" to 4" pieces. What fun!

The highlight of the day was when John gave me a Persimmon crotch to take home and then suggested that we go ahead and take out the pith while I was there. This led to flattening the round sides, which gave me 2 beautiful slabs of crotch wood. Unfortunately, there was a bark inclusion running the length of one piece, but I was expecting that given the angle of the two trunks.

Anyway, I have a sentimental attachment to Persimmon, so that makes these 2 pieces extra special, along with the 2 he gave me that he cut several months ago. Persimmon is the first tree that I ever cut up for turning wood, as well as the first turning wood that I ever sold, after a good sized tree fell across my driveway. Wally and Ellis both ended up with a piece of that tree.

As the man says; "If you look up 'nice feller' in the dictionary, you'll find John's picture!

Gary

Below you see the fruits of our labors.


img

Re: What a great afternoon!

#2

JKJ, check your e-mail

Gary Evans Tallassee, TN

>I sent the specs on the Jet shaper to your direcway address.

Gary

Re: What a great afternoon!

#3

Re: What a great afternoon!

Jennifer@Indy.USA

>Ooooo...nice :) I sure does sound like a Great Afternoon!

Re: What a great afternoon!

#4

Re: What a great afternoon!

JKJ in East TN

>I had a great time too! The weather was wonderful and I could even almost breathe again after being sick for a month. And Gary is always entertaining. :) Maybe next time we'll have time to go 4-wheeling on the trails.

Although I got it for utility, I've had more fun with the sawmill than I ever imagined. More "free" lumber than I thought possible. For making turning blanks, it's far safer than using a chain saw, cleaner cut, and much less waste. If I can get good and retired in a few months, I'd like nothing more that to slice up a steady stream of chunks for woodturners. Come visit with a truckload of firewood and go home with turning blanks. It's almost a religious awakening to release the beauty hiding in that worthless-looking chunk of firewood. Kind of like woodturning!

JKJ

Re: What a great afternoon!

#5

JKJ....

W.C. Turner

>Did ya'll cut the crotch, that's pictured, with your sawmill, chainsaw, or bandsaw?? Thanks

Re: What a great afternoon!

#6

Re: JKJ....

Gary Evans Tallassee, TN

>Hi WC,

I'm not John, but I can tell you that we did all the slabs pictured on his sawmill. We used a flat board to cover the bunks on the sawmill frame, a temporary wooden dog at one end and the normal dogs at the other. We were sawing up pieces around 2 ft. long.

Gary