Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Platter Blanks

Posts

Platter Blanks

#1

Platter Blanks

Doug Reynolds in Seattle

>What is a good starting thickness for green wood platter blanks that will be about ten inches in diameter (limited by a Jet mini)?

Re: Platter Blanks

#2

Re: Platter Blanks

Gary Evans Tallassee, TN

>Hi Doug,

It all depends on how thick you want the finished platter to be. If you use a glue block, you can make platters from 4/4 stock. If you use 8/4, you have room to put your tenon on the workpiece, but you have to turn away a lot more wood.

Gary

Re: Platter Blanks

#3

Re: Platter Blanks

John Lucas

>Depends on grain direction also. If it's flat sawn you will get more cupping as it drys but at 10" probably not more than 1/4 to 3/8". I would go with Gary's 4/4 to 8/8. That's pretty safe unless you like big tenons for holding.