Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

A Good Save....

Posts

A Good Save....

#1

A Good Save....

Wally Dickerman in Arizona

>I retrieved a chunk of Birch burl which had been discarded as un-turnable. It's a lovely piece of wood except that it had numerous small areas of pure rot, and lots of small cracks. I decided to "save" it by using a method that I've used before. I carefully rough turned it as best I could. After a period of drying I soaked it for 24 hours in a solution of 50/50 white glue and water. I allowed it to dry for a few days. I mounted it on the lathe, turned it round as it had warped, making the opening larger after truing it up. The rotted areas had firmed up nicely, and as a plus, the cracks had all disappeared. The wood had swelled and of course I was soaking it in glue. Here is the result.

Wally


img

Re: A Good Save....

#2

Re: A Good Save....

Wally Dickerman in Arizona

>Dimensions are 8 x 3 1/2 inches.

Wally

Re: A Good Save....

#3

JL

Re: A Great Save, not a good one!

JL

>

Re: A Good Save....

#4

Re: A Good Save....

Carole Valentine

>Dang, Wally! Talk about a silk purse out of a sow's ear...I'm going out to fish a couple of punky chunks out of my burn barrel...

Re: A Good Save....

#5

Re: A Good Save....

Bill Neddow

>Now that is a piece of wood well worth all the trouble. Dang nice turning job too! (As always)

Re: A Good Save....

#6

Re: A Good Save....

georgetroy

>Way to go Wally, looks good. You have a solid segmented turning piece here with all the glue. GT

Re: A Good Save....

#7

finish?

GaryG in MD

>Nice job Wally. A beautiful save AND a lesson for us on how to do it ourselves -- not bad. Thanks for both.

So how do you finish a piece that's partly composed of dried white glue? Oil? No oil? Lacquer? Wax?

Gary

Re: A Good Save....

#8

Re: A Good Save....

Ron in Drums PA

>Wonderful Wally!!

Re: A Good Save....

#9

Re: A Good Save.... *LINK*

georgetroy

>Another Wallyism, photo and information right here on this link. GT


Wally bowl treatment

Re: A Good Save....

#10

Re: A Good Save....

Mike Rubes, Apex, NC

>Hi Wally,

Very nice. I really like the textured treatment around the rim. Nice effect. As always, the finish is top notch.

Thanks for the pic. Your's are always "keepers" :)

Mike

Lathe still getting dusty with bookshelf dust in Apex, NC...

Re: A Good Save....

#11

Re: A Good Save....

Gary in Zirconia, NC

>Wally,

What did you texture the top with? Looks good!

Re: A Good Save....

#12

Re: A Good Save....Retry on Link *LINK*

georgetroy

>My link had to many http////////////////////. Sorry about that Wally


Wally bowl treatment

Re: A Good Save....

#13

Re: A Good Save....

Wally Dickerman in Arizona

>It's textured with a Sorby texturing tool

Wally

Re: A Good Save....

#14

Re: A Good Save....Retry on Link

Wally Dickerman in Arizona

>Thanks George. I still have that piece. I use it ocassionally in a demo when I discuss the process.

Wally

Re: A Good Save....

#15

Re: finish?

Wally Dickerman in Arizona

>I think that you could use most any finish. I used my regular oil finish. I get a satin finish instead of a high gloss finish. I like it that way anyway.

Wally

Re: A Good Save....

#16

Re: A Good Save....

Jennifer@Indy.USA

>Wally, I would say that is a fantastic save!

Beautiful :)

Re: A Good Save....

#17

I will need to inspect that one.

Dave Smith

>Hi Wally,

I can inspect that bowl on Saturday and let everyone know how well it really looks. Warning! It may be a take home inspection job if you want it done right.

Looking forward to seeing you this weekend. Will your bride, Jane, be accompanying you to Mesa? If so Sandy would love to see her.

Dave Smith

Watching Snowboard Cross in Mesa, AZ.

Re: A Good Save....

#18

Re: A Good Save....

Mango

>It is beautiful.

Re: A Good Save....

#19

Re: A Good Save....

Chip Peterson

>Great save Wally. Thanks for the technique. One question - with all the water that soaks in, are a few days drying enough to "dry" it? It seems like we could be back to square one on the dryng schedule.

By the way, yes I started one! :) Thank you.

Re: A Good Save....

#20

Re: A Good Save....

Wally Dickerman in Arizona

>The amount of water that soaks in in a 24 hour soak is actually quite small except for the rotted area. Also, that water will release from the wood in a different manner than the original sap wood that was in the wood. If the wood was dry before the soaking I've found that it only takes a few days. Just use your own judgment.

Wally

Re: A Good Save....

#21

Re: A Good Save....

Les Robison

>Wally what is the shelf life of the 50/50 mix if kept in a semi sealed continer?