Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

this is the 3th place finisher *LINK*

Posts

Re: this is the 3th place finisher *LINK*

#2

Leo Van Der Loo

Re: this is the 3th place finisher 

Leo Van Der Loo

>


img

Re: this is the 3th place finisher *LINK*

#3

Leo Van Der Loo

Re: this is the 3th place finisher 

Leo Van Der Loo

>


img

Re: this is the 3th place finisher *LINK*

#4

Re: this is the 3th place finisher

Jennifer@Indy.USA

>Very nice! Great job Leo and congratulations!

Re: this is the 3th place finisher *LINK*

#5

Re: this is the 3th place finisher

RevDoug

>Very nice piece. Nothing 3rd place about it.

Turn 'em round,

Re: this is the 3th place finisher *LINK*

#6

Re: this is the 3th place finisher

Ad de Crom

>Leo, dit ziet er erg mooi uit.!!

Wat zijn de afmetingen van deze schaal?

Ad de Crom Bergen op Zoom Nederland

Re: this is the 3th place finisher *LINK*

#7

Re: this is the 3th place finisher

George Van in WI

>Congratulations Leo, that is one nice piece of wood! I like the undercut rim, it seem to accent the grain at the opening. Was this burl or does white ash get this much figure?

Re: this is the 3th place finisher *LINK*

#8

Leo Van Der Loo

Thank you Jennifer

Leo Van Der Loo

>

Re: this is the 3th place finisher *LINK*

#9

Leo Van Der Loo

Thanks Rev, the competition was stiff.

Leo Van Der Loo

>

Re: this is the 3th place finisher *LINK*

#10

Leo Van Der Loo

Dank u wel Ad, it is 9.5"x3.5"

Leo Van Der Loo

>

Re: this is the 3th place finisher *LINK*

#11

Leo Van Der Loo

Thank you George *LINK*

Leo Van Der Loo

>Yes I find that also George, it was the reason I made the wide plain curving rim, nothing to take away from wood, then undercutting sets it off and also brings down the weight, it feels good when picked up.

Have fun and take care

Leo Van Der Loo


http://homepage.mac.com/l.vanderloo/PhotoAlbum25.html