Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Walnut and Curly Cherry

Posts

Walnut and Curly Cherry

#1

Walnut and Curly Cherry

Dick Parr

>This is a little valentine present for my wife. Made of curly cherry and walnut, finished to 600 grit, with wipe on poly and Renaissance wax.

The dimensions are 26-3/8" x 2-5/8"

Dick


img

Re: Walnut and Curly Cherry

#2

Re: Walnut and Curly Cherry, Backside 

Dick Parr

>


img

Re: Walnut and Curly Cherry

#3

JL

Re: Where are you going to put something that big?

JL

>It's very nice.

Re: Walnut and Curly Cherry

#4

Re: Where are you going to put something that big?

Don Tewell

>It's husbands like you that give husbands like me a bad name. Thank God my wife never visits this site. Really, it looks great.

Re: Walnut and Curly Cherry

#5

Re: Walnut and Curly Cherry

tek-Brunswick, Ohio

>Beautiful! and the turning looks pretty good too!

Re: Walnut and Curly Cherry

#6

Re: Walnut and Curly Cherry, Backside

Gary Evans Tallassee, TN

>Nice work, Dick,

Very pretty and so is your bride.

Tell Micky I said hi,

Gary

Re: Walnut and Curly Cherry

#7

Re: Walnut and Curly Cherry

Terry Quiram, Roanoke Illinois

>Dick

Thats pretty cool but what in heck is your wife going to use it for?

Terry

Re: Walnut and Curly Cherry

#8

Re: Walnut and Curly Cherry

Jim Ketron

>Nice Job Dick!

Great looking platter!

Re: Walnut and Curly Cherry

#9

Re: Walnut and Curly Cherry, Backside

George Van in WI

>Very nice Dick. I'm with Don on the bad example, my wife fortunately does not frequent this site either! Should hold a lot of cheese and crackers :-)

Re: Walnut and Curly Cherry

#10

Re: Walnut and Curly Cherry

Carole Valentine

>Wow, Dick! You're pushing the limits on that DVR aren't you? That's something else. Nice work!

Re: Walnut and Curly Cherry

#11

Impressive!

Dominic Greco in Richboro PA

>Wow Dick, You did a great job on this! And correct me if I'm wrong,.....you're relatively new to this. Aren't you?

If so, kudos to you! (and if you're an old hand at this as well!)

Dominic

Re: Walnut and Curly Cherry

#12

Re: Impressive!

Dick Parr

>Thank you everyone, this was a challenge to make.

Yes Dom I have only been at turning for about 20 months. Thanks

Carole this is about as big as can be turned on the DVR. They say 29" but I was reaching to turn this piece. To make anything bigger I will have to modify and off set some tool rests. But I don't plan on making anything bigger then this, with this lathe.

Don my wife doesn't know what she is going to do with it, I need to find a way to hang it on the wall in the dinning room.

The curly cherry that is in this piece is what was left over from the dinning room table I made 10 years ago. The walnut is a very little of the 400-500 bf I got from friend for a cup of coffee last month.

Gary, Mickey said to say hi.

Thanks again everyone.

Dick

Re: Walnut and Curly Cherry

#13

Re: Walnut and Curly Cherry

Dave Bonde - Iowa

>Very nice Dick - she looks very happy. Dave

Re: Walnut and Curly Cherry

#14

Re: 20 Months!!

Allen Neighbors

>Dick, this evening, Marolyn and I were eating popcorn from two of the first bowls I ever turned, and she said that next month would make two years that I've been turning. I think it's absolutely awesome! that you've turned something this large and this beautiful after just 20 Months. Congratulations! What a piece of art!

Allen

Still dry, in Childress Texas

Re: Walnut and Curly Cherry

#15

Re: Walnut and Curly Cherry

DougJ in Crawfordsville, IN

>Very nice Dick,

should make for a great conversation piece hanging in the dining room.

Re: Walnut and Curly Cherry

#16

Re: Impressive!

JKJ in East TN

>>...To make anything bigger I will have to

>modify and off set some tool rests.

Dick,

Wow, impressive! I've not yet had the guts to turn anything big. Next thing you'll be building one of those monster lathes and driving it with a diesel engine.

Hey, if you do decide to build/modify tool rests, I have a shed full of steel and cutting and welding equipment.

JKJ