Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Preparing Green wood for Pen Blanks

Posts

Preparing Green wood for Pen Blanks

#1

Preparing Green wood for Pen Blanks

mark4583

>Whats the best way to prepare green wood for pen blanks?

should I cut to a larger square size, coat with a sealer and set to dry?

Whats the best process for this?

Thanks

Re: Preparing Green wood for Pen Blanks

#2

Re: Preparing Green wood for Pen Blanks

Gary Evans Tallassee, TN

>Hi Mark,

The pro pen makers can correct me here, but I think you'll end up with less waste if you slice your wood into planks of the necessary thickness, 5/8" or 3/4" x whatever width. Coat the ends with sealer and put up to dry on stickers just like lumber. Saw into squares of the correct length after the planks are dry.

Gary

Re: Preparing Green wood for Pen Blanks

#3

Re: Preparing Green wood for Pen Blanks

RevDoug

>I'll probably get chastized for this, but I've never had trouble turning green blanks. Species of wood does make a difference. Madrone, apple, most nut woods are know to move a lot. Those big movers I would cut into 3/4" or 7/8" and to length and either boil them or try the DNA process. Either way I believe you will come out with usable pen blanks.

Turn 'em round,