Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

On a wing and a prayer! (Long)

Posts

On a wing and a prayer! (Long)

#1

On a wing and a prayer! (Long)

Gary Evans Tallassee, TN

>With a little luck, I'll be heading out tomorrow for the Desert Woodturning symposium. I should have been gone today, but my wife has come down with what we assume is the same virus that slowed me down this weekend. Unfortunately, it has whacked her a lot harder than it hit me. I'm hoping that with a good night's sleep, she'll be back on the rails shortly. I can't leave her if she's down, as somebody has to feed the wood furnace and I'm not going to ask her to do that between trips to the john.

Whatever time I leave tomorrow, it's going to be a push to get to AZ by Friday afternoon to get set-up. Unfortunately, I'm forced to drive a buggy that can't really be pushed, an '88 Isuzu Trooper with 278K on the meter. Suzy has all the heart in the world, but she doesn't make a lot of HP.

Anyway, wish me luck and send some prayers my way over the next few days. I have a feeling I'm going to need all the help that I can get on this trip.

I'm still looking at the weather to decide which way to go, but the atlas I'm looking at shows the fastest route to be I-40 across TN to I-30 in Little Rock, thence to I-20 in Dallas, from there to I-10 south of Pecos, TX and finally into Phoenix. I'd be interested in hearing from folks along that route if you see this. I'll have my wife check the thread for the next few days. I might have to drop by and camp for a day or two if I run into mechanical problems. Fortunately, I will be hauling turning wood with which to repay any kindnesses.

If you are going to the symposium, come by the Talasi Hardwoods booth and say hello. I love to meet folks from WC.

Next stop, Mesa,

Gary

Re: On a wing and a prayer! (Long)

#2

Re: On a wing and a prayer! (Long)

Chris K in MD

>Good Luck Gary! May the force be with you.

Re: On a wing and a prayer! (Long)

#3

Re: On a wing and a prayer! (Long)

Gary Evans Tallassee, TN

>Thanks for the good thoughts, Chris.

I PROMISE to get that box to you as soon as I get back.

Gary

Re: On a wing and a prayer! (Long)

#4

Re: On a wing and a prayer! (Long)

George Van in WI

>Good Luck Gary, hope all goes well. I will see you there.

Re: On a wing and a prayer! (Long)

#5

Re: On a wing and a prayer! (Long)

Sean Troy

>Gary, get there when you can. Don't push your wife and yourself to hard,we'll still be there. Temps are expected to be between 71-74 degrees and partly sunny. That ought to make you feel a little better. Sean

Re: On a wing and a prayer! (Long)

#6

Re: On a wing and a prayer! .....Got my prayer!

Ruth Niles

>Good luck and hope your wife is feeling much better soon. It's no fun being sick. Hope you get there safe and in good time to have a really great show. Mucho luck selling!

Re: On a wing and a prayer! (Long)

#7

Bummer, man!

Gary Evans Tallassee, TN

>Unforeseen circumstances have combined to cancel the AZ trip at the last minute. Thanks to all who were wishing me luck on the trip.

The good thing is that there will be a flood of new wood available on E-bay over the next few days.

Gary

Re: On a wing and a prayer! (Long)

#8

Re: Bummer, man!

Chris K in MD

>Sorry to hear that Gary, I hope that your wife feels better.

Re: On a wing and a prayer! (Long)

#9

Re: Bummer, man!

Paul in Phoenix, AZ

>Sorry to hear that Gary. I hope all is well. There is always next year.

What is your eBay handle? I'll have to check your auctions out.

Re: On a wing and a prayer! (Long)

#10

Re: Bummer, man!

Gary Evans Tallassee, TN

>Thanks Chris,

She's already feeling better. There were some other issues which poked up their heads this morning and killed the deal.

On the positive side, now I have time to work on your box. 8^]

Gary

Re: On a wing and a prayer! (Long)

#11

Re: Bummer, man!

Gary Evans Tallassee, TN

>Thanks Paul,

I sell under talasi1. I'll try to have something on e-bay by this evening. I have some beautiful spalted birch, hornbeam, and maple right now as well as a ton of dry penciled cherry 3x3x12 and 2x2x12. Well, maybe not quite a ton! 8^]

Bid on several, I'm offering free shipping east of the Mississippi with a $50 order and discounted shipping to the West.

Gary Evans

Talasi Hardwoods

Re: On a wing and a prayer! (Long)

#12

Re: Bummer, man!

JKJ in East TN

>Bummer for sure, Gary, must be disappointing. Hope your wife recovers quickly. I've been sick for over a month and sick of it so I wish excellent health for everyone else. If I kick the bucket, tell my wife I said you can have all my wood.

Is the hornbeam American/Eastern hophornbeam? What size? Dry or green? I may be interested in some or a bunch of this. Also, I'm always on the lookout for good spindle blanks large enough for gavels (over 2" is good). Do you have any osage orange?

If you make a run up this way, I have some amazing spalted figured maple blanks to show you.

JKJ

Re: On a wing and a prayer! (Long)

#13

Re: Bummer, man!

Gary Evans Tallassee, TN

>Hi John,

I was thinking about you yesterday since the schedule change. You will probably see me within the next few days. How does your schedule look?

Do you think your wife would take my word? I think you should put it in your will. 8^] Do I get your bandsaw, too?

Unfortunately, I have very little of the American Hornbeam. It is relatively dry and nicely spalted. I'll bring some when I come. I noticed the crew who recently came through and cleared the powerlines had knocked down a decent sized Hornbeam, maybe 10" diameter. Maybe I can bring it with me and we can saw it up on your bandsaw.

Gary