Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

A "Tipless" Pen

Posts

A "Tipless" Pen

#1

A "Tipless" Pen

RussFairfield

>Jim has been showing us his "Clipless" pens, so I wanted to show one with something missing on the other end. This is a "tipless" pen.

There is really a metal Slim-Line tip buried inside on the end of the brass tube. This makes the tip as strong as a normal pen and eliminates the wear and breakage that was a problem when the end of the ink cartridge was just sticking out of a drilled hole in the wood.

The top pen is Eastern Cedar that was hardened with a lot of very thin CA glue. The one under it is Golden Desert Ironwood from Bill Baumbeck at AZ Silhouette.


img

Re: A "Tipless" Pen

#2

Re: A "Tipless" Pen

eaglesc

>Nice effect Russ.

I have been modifying the components of the kits to "hide" them.This was next on the list.

Did you use a "step" bit?

(I guess you have a new entry for your album now)

Re: A "Tipless" Pen

#3

Re: A "Tipless" Pen

Jim Shaver - Oakville, Ontario

>Hi Russ,

I really like the flow of the body to the tip...I can see wanting to try this method...looks elegant and classic, a great detail!

Take care,

Jim

Re: A "Tipless" Pen

#4

Re: A "Tipless" Pen

RussFairfield

>The bottom of the hole was drilled with a bit that was ground to the same taper as the metal tip, and with a short straight nib on the end to make the hole for the point. That makes everything lined up without having to drill from both ends and hoping for the best.

Re: A "Tipless" Pen

#5

Re: A "Tipless" Pen

JKJ in East TN

>What a great idea. Very clever! (you could probably sell those drill bits)

JKJ