Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

light tent

Posts

light tent

#1

light tent

wilzirkle

>Hey I was searching for information on light tents. I knew they had been discussed many times here, but I searched elsewhere too. I found these plans for one. I thought they did a nice job explaining it so I wanted to share. http://www.pbase.com/wlhuber/light_box_light_tent

Hope it helps someone else.

Wil

Re: light tent

#2

Re: light tent

john lucas

>Wil Excellent source. Not exactly the same as mine but they all work. About the only problem I see would be with really glossy pieces. You will see the pipe. Ideally the cloth needs to be on the inside. If your pieces aren't mirror glossy this system should work quite well.

Re: light tent

#3

Re: light tent

Bob Edwards

>Wil, I made mine on the fly,without plans. It is not a stand but a box. I cover the top and sides with a piece of cloth from and old white sheet. There is a tube or pocket sewn in each end that threads onto the PVC. The Box construction makes it stronger and better able to use goose neck clip on lights. I don'i have a problem with glare but I did clean the PVC with steel wood because the were dirty and scuffed. The pictures are poor but If you would like more info just drop me an email. The paper is a role of white rice paper.


img

Re: light tent

#4

Re: light tent

Bob Edwards

>Another shot!!


img