Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

lesson learned

Posts

lesson learned

#1

lesson learned

john lucas

>I was working on an inside out turned project and apparently I should have done my sequences differently. I should have turned the groove in the top of the leaves first instead of last. Oh well. I'll try again. This is another one of those projects that has a potential place for a mishap in just about every stage of the project. Hopefully no more will occur. Of course I've got to recut this part.


img

Re: lesson learned

#2

Re: lesson learned

Phil Joines

>John,

What's wrong with it? I have lots of simular pieces.

:>) :>) :>) :>) :>) :>) :>) :>) :>) :>) :>) :>) :>)

Re: lesson learned

#3

Ha Ha Phil so do I :)

john lucas

>

Re: lesson learned

#4

Re: lesson learned

adrien

>with a little cleaning up it would make a nice alcoved base for a small object.

Re: lesson learned

#5

Re: lesson learned

Chris Teenor

>John,

It's amazing to me that even your "mistakes" look better than most of my stuff. I've tried several of the inside/out pieces, but they don't seem to work out as I'd like. I'll have to keep trying.

Thanks for your input on this site.

-CRT