Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

My first piece of turning wood *LINK*

Posts

My first piece of turning wood *LINK*

#1

My first piece of turning wood *LINK*

Ray Carson, New Jersey

>Hello,

Okay......I didn't buy all of these but I did buy the chunk in the upper left corner of the photo.

Since I haven't turned since high school I've been messing with some scrap trying to get my feel back for the lathe. Wood chips have been flying. It's like riding a bike.

Now I just have to figure out how to mount my new Rose Myrtle Burl. Trying saying that 10 times fast. :-) The website has some instructions on how to mount a piece like this but I could use some pointers. I need to buy one of those chuck thingies too.

I'm giving the web site of where I bought it. Maybe some of you have seen it or bought from Lee Tree Woodworks.

The owner is a guy named Lee Tannenbaum. The whole transaction was great and he was most helpful with my emails. He even called me with a price quote instead of an email.

Wish me luck,

Ray


img

http://www.leetreewoodworks.com/index.htm

Re: My first piece of turning wood *LINK*

#2

Brad Vietje

Re: My first piece of turning wood

Brad Vietje

>Woo-Woo ! Gorgeous wood there !

I'd take my time and get that chucky thingy, and put in some practice before committing that piece. Personally, I know what I'd make from it, but if I were you, I'd want to drool and dream a bit over some beautiful, classic forms, and maybe even sketch a few ideas before plunging ahead. The slanted terrain of the natural edge gives you even more to contemplate ...

From a practical POV, I tend to make rather small feet that I finish off last between centers, so I almost always start a piece between centers to achieve the most pleasing form and balance, then create a small tennon foot. In much of my work, the final foot will be shaped from the wood comprising the tenon itself -- no real waste.

Safe Spinning,

Brad Vietje

Newbury, VT

Re: My first piece of turning wood *LINK*

#3

What a Yummy Smorgasboard!

Jennifer@Indy.USA

>Ray, it looks like you are set to go! I'd take Brad's advice and do some practice on some "not-so" purty pieces first. Some nice fresh-cut cherry or poplar is great to get back on your turning feet. make a ton of shavings and just cut a big piece down to nothing. Toss it aside and start another. In no time you'll be ready to chuck up those beauties and knock em dead!

Can't wait to see what's to come of these :)

Jen

Re: My first piece of turning wood *LINK*

#4

Practice makes perfect !

Ray Carson, New Jersey

>Hello,

Like I said, I've been turning scraps to get the feel back. I don't plan to do anything with this puppy for a while. It's all wax coated so it can sit for a bit. Lee at Lee Tree Woodworks said it's a very stable wood so I'm not worried.

Did you visit the website and see some of the turnings? Wow !!!

Ray

Re: My first piece of turning wood *LINK*

#5

Re: Yummy Smorgasboard!

Ray Carson, New Jersey

>Jen,

Thanks for the advice. I've been using poplar only because it's cheap. If I had the money I'd buy one of everything he had.

$$$$$$ Cha-ching.

The piece I bought was $34.77 total. I thought if I ruin it, it wouldn't set me back a whole lot.

Ray

Re: My first piece of turning wood *LINK*

#6

Forgot to ask you Brad.........

Ray Carson, New Jersey

>what would you do with it?

Ray

Re: My first piece of turning wood *LINK*

#7

Brad Vietje

Re: Forgot to ask you Brad.........

Brad Vietje

>Well, let's see... now that I look again I have three ideas...

* I like hollow forms and natural edged vases most of all, so my initial idea was to make a hollow form with the burl edge oriented about straight up as the chunk is pictured -- a small opening wouldn't look too crooked... I'll try to post one I did that is somewhat similar, though I'd shoot for a slightly larger foot, as this one was already dropped on its bark edge in a gallery.

* a natural-edged vase a la Bert Marsh, looking more like a wine glass goblet, with a nice subtle curve. I'd leave the natural edge skewed on purpose -- again upright as pictured.

* a balanced, natural-edge bowl with a rather even rim geometry. this means turning between centers to get the natural edge evenly balanced, and would not be the largest form possible from this piece, as quite a bit of this gorgeous stuff would be turned or cut away.

I'm sure there are many other ideas, too !

Safe Spinning,

Brad Vietje

Newbury, VT


img

Re: My first piece of turning wood *LINK*

#8

Brad Vietje

Re: Forgot to ask you Brad.........

Brad Vietje

>Well, let's see... now that I look again I have three ideas...

* I like hollow forms and natural edged vases most of all, so my initial idea was to make a hollow form with the burl edge oriented about straight up as the chunk is pictured -- a small opening wouldn't look too crooked... I'll try to post one I did that is somewhat similar, though I'd shoot for a slightly larger foot, as this one was already dropped on its bark edge in a gallery.

* a natural-edged vase a la Bert Marsh, looking more like a wine glass goblet, with a nice subtle curve. I'd leave the natural edge skewed on purpose -- again upright as pictured.

* a balanced, natural-edge bowl with a rather even rim geometry. this means turning between centers to get the natural edge evenly balanced, and would not be the largest form possible from this piece, as quite a bit of this gorgeous stuff would be turned or cut away.

I'm sure there are many other ideas, too !

Safe Spinning,

Brad Vietje

Newbury, VT


img