Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Wood drying question

Posts

Wood drying question

#1

Wood drying question

David Sparks

>A friend is trying to make a table top out of a section crosscut from a sycamore tree. The slab is about three inches thick and about four feet across. The wood is green. What is the best way to dry the wood without it splitting? Thank you for your help.

Re: Wood drying question

#2

Re: Wood drying question

Ed Karch

>With sycamore it may be impossable it really likes to move as it dries.

Re: Wood drying question

#3

Re: Wood drying question

Gary Evans Tallassee, TN

>David,

Ed is correct. It is very difficult to dry crosscut sections without cracking due to the difference in shrinkage rates radially vs. tangentially. The best method I've seen for dealing with the shrinkage issues is to dry two adjacent sections. Cut a slot from the edge to the pith in a different area on each section to release the drying stresses. After the two sections are dry, a pie-shaped piece can be cut from one section and glued into the other.

Good luck to your friend.

Gary