Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

size of toolpost for Delta Midi?

Posts

size of toolpost for Delta Midi?

#1

size of toolpost for Delta Midi?

Dominic Greco in Richboro PA

>Hi everyone,

Sorry I haven't been around much. I've had lots to do and very little time to get it done.

Anyone know off hand what the diameter of the tool post for the Delta Midi lathe is? I recently acquired a used (but in excellent shape) Bestwoods Modular toolrest system. I got the 1" dia post for my Jet Lathe, and the gent I bought it from threw in the tool post for a mini lathe. When I got it home I found that it was too big to fit in the tool rest. So I'm having a friend with a metal lathe mill it down to size. I just need to tell him the diameter.

See ya around,

Dominic

Re: size of toolpost for Delta Midi?

#2

Re: size of toolpost for Delta Midi?

JKJ in East TN

>Dominic,

If you go to the Best Wood Tools website (http://www.bestwoodtools.com/) they list the post diameter for many lathes on the modular toolrest page. But if you have the lathe handy, can you simple measure the hole with calipers?

BTW, I've been usings some of their rests (including the box rest) and I think they are well made.

JKJ

Re: size of toolpost for Delta Midi?

#3

Re: size of toolpost for Delta Midi?

Stephen Mushinski

>Dom,

I think it is 5/8" but I am at work and cannot take a measurement.

Steve

Re: size of toolpost for Delta Midi?

#4

Re: size of toolpost for Delta Midi?

Rick Davenport

>Stephen is correct.

It's 5/8"

Re: size of toolpost for Delta Midi?

#5

Thank you

Dominic Greco in Richboro PA

>for answering my question. I can now tell my buddy what size to mill it down to.

BTW, since I was on the road, the lathe was about 50 miles away at the time I asked. Otherwise, I would have just measured it. I'm not that lazy!

Dominic

Re: size of toolpost for Delta Midi?

#6

Re: Thank you

Mark Kauder, Phenix City, AL

>Dom,

Check your email

Mark

Re: size of toolpost for Delta Midi?

#7

Re: Thank you

JKJ in East TN

>>... I'm not that lazy!

Dominic, I'm sorry I implied you were lazy - everyone who visits here knows that is not so! My only excuse for my unthinking statement is extended illness and the narcotics. I take it back: ?srepilac htiw eloh eht erusaem ylpmis uoy nac...

JKJ