Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Photo backdrop: vinyl or PVC card stock?

Posts

Photo backdrop: vinyl or PVC card stock?

#1

Photo backdrop: vinyl or PVC card stock?

Jim Terry

>Ken,

I have been using vinyl fabric that you can obtain at upholstry shops

I have obtained it in flat black, flat grey, and flat white. The nice

thing is you can cut it to size and roll it up on a dowel. A single

piece can go under the photographed object and from a background

without a corner.

Jim

Re: Photo backdrop: vinyl or PVC card stock?

#2

Re: Photo backdrop: vinyl or PVC card stock?

Ken Grunke from SW WI

>Jim, that sounds like an easily obtainable and low priced alternative. But if there's any texture to the surface, I'd like to avoid that--especially if wrinkles develop and have to be ironed out.

Thanks!

Re: Photo backdrop: vinyl or PVC card stock?

#3

Re: Photo backdrop: vinyl or PVC card stock? *LINK*

John Lucas

>Ken Check out the link below. They sell a fake velour background. It stays wrinkle free and is dead black. I wouldn't place your tools on it however. It does show lint and dust you need one of those tape lint removers but other than that it's really good stuff.

They also sell graduated background and they look really good but take extreme care to keep from scratching them. They are painted and scratch easily.

I use the 4foot seamless backgrounds at work. They are 12 yards long. you can cut them to length if 4 feet is too big. You just roll out what you need and when it gets dirty or marked you cut it off. For our purposes shooting turnings I cut them in half. They last a long time this way.


http://www.porters.com