Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Pen Blanks on E-Bay

Posts

Pen Blanks on E-Bay

#1

Pen Blanks on E-Bay

mark4583

>Any Reliable sources on E-Bay that I could purchase Pen Blanks that anyone had used with no problems?

Thanks

Re: Pen Blanks on E-Bay

#2

Re: Pen Blanks on E-Bay

Mike Cunningham (Cape May)

>Try Rob at Figuredwoods. He sells on Ebay and also via email at Figuredwoods@yahoo.com

He's located in Delaware, sells very nice products, is trustworthy and reliable.

Mike Cunningham

Re: Pen Blanks on E-Bay

#3

Re: Pen Blanks on E-Bay

Wayne

>Some of the best blanks you can buy on e-bay are at Clints

http://stores.ebay.com/Clints-Hand-Selected-Hardwoods

Re: Pen Blanks on E-Bay

#4

Re: Pen Blanks on E-Bay

Ken Oakley-Sunny St. Cloud, Fla.

>I sell pen blanks on Ebay. Mostly Citrus woods, such as orange, tangerine, grapefruit and lemon, plus camphor wood. You can check out my feedback for comments from previous bidders or some of the people on WC know me from way back and most of them can be trusted to give a comment on my reliability. Also I live in Fla. Ebay user name is Deltakong. There is a listing for camphor on now. I have also sent boxes of scraps and shorts to some of the people on this forum for just the postage.

Re: Pen Blanks on E-Bay

#5

Re: Pen Blanks on E-Bay

Ken Grunke from SW WI

>Here's my personal two cent's worth on buying pen blanks:

If you have any source of wood, be it small branches or whatever, buying pen blanks is a waste of time and money. 3/4" square pieces of wood have to be one of the easiest forms of turning wood to acquire. Some of the prettiest wood can be found in your own neighborhood, for that size. Trimmings from ornamental, orchard, or any yard trees can be used, if you have a way to cut them into 3/4" squares. Of course, if you don't have a bandsaw, or tablesaw, or if you desire exotic woods not locally available, then buying pen blanks is the way to go.

It's just that I see often pen blanks on ebay going for a price that is quite beyond their value, although there are some good deals to be had. You can buy 3/4" stock and rip it into squares yourself, or even split it into small sections with an axe. But buying pen blanks in general to me seems kind of wierd!

Just ranting, sorry.

Re: Pen Blanks on E-Bay

#6

Re: Pen Blanks on E-Bay

RevDoug

>I've bought hundreds of pen blanks on eBay with out any problems. It became a game for me. If I could get them for <$1 delivered, all was good. I would pass if they got to the point of .01 more than my $1 limit. Never had a problem with any of the dealers there. Just be sure to read all the information, set your limits and stick to it.

Turn 'em round,

Re: Pen Blanks on E-Bay

#7

Re: Pen Blanks on E-Bay

DougJ in Crawfordsville, IN

>For the price of shipping, I'll send you some osage, red cedar, spalted maple or elm (not sure which), walnut, cherry. Send me an email and we'll talk.

Re: Pen Blanks on E-Bay

#8

Ken sent me some...

Clem Wixted

>...of what he calls not good enough to sell on E-Bay, just for the postage. If these are culls there should be no problems with his good stuff if you are looking for the species he sells.

Thanks, Ken

Clem

Re: Pen Blanks on E-Bay

#9

Thanks Clem.

Ken Oakley-Sunny St. Cloud, Fla.

>

Re: Pen Blanks on E-Bay

#10

Re: Pen Blanks on E-Bay

eaglesc

>The problem with buying precut blanks is you are forced to rely on the fact the supplier is trying to get the MOST pieces out of a given piece of wood rather than the best looking.

I Prefer to buy 1x stock wide enough to cut it with the best possible figure in mind.

Cross or bias cut.

Precut straight grained woods are ususally a waste of otherwise interesting good looking woods.

This was recently Covered here.

Check Russ Fairfields website how he describes a different way to look at cutting blanks.

Re: Pen Blanks on E-Bay

#11

Re: Pen Blanks on E-Bay

RevDoug

>You make a great point. I guess it comes down to what the pen turner is looking for. Am I looking to reduce overhead? or am I looking to make the best pen possible?

I guess as a beginning pen turner my attitude was to get the most wood with some kind of interesting grain for the least amount of money possible. I'm at a different point now though and tend to look for the best piece of wood as you stated. If I am going to go for the higher end buyer, I must go for the best section out of a board or even a log.

Thanks for the thought provocation.

Turn 'em round,