Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Rosewood Pen

Posts

Rosewood Pen

#1

Rosewood Pen

Jim Shaver - Oakville, Ontario

>Hi,

I am having fun working with a new pen design for me, solid ended pens. I made this one yesterday from some Brazilian Rosewood that was given to me by a good friend, Konrad Sauer. Konrad makes incredible infil planes, this wood was from his collection

This pen is also an example of what you can do by not allowing hardware to limit your design. I like the idea of a solid end pen and I am working on one with a solid end cap as well, no clip. The feel of the wood is also a nice characteristic of rosewood, it�s really smooth!

Anyway, there is a form in pen turning, I took real care to try and balance the cap and the body in this one. The blank was step drilled to also allow the flexibility of conversion to a roller ball pen option.

The only limit is imagination..

Take care,

Jim


img

Re: Rosewood Pen

#2

Re: Rosewood Pen

Jim Shaver - Oakville, Ontario

>Hi,

This is what it looks like capped..

take care,

Jim


img

Re: Rosewood Pen

#3

Re: Rosewood Pen

Carole Valentine

>Jim, I really like that design with the solid end! It looks more like a scuplture and must feel great in hand. Nice!

Re: Rosewood Pen

#4

Richard Allen

Re: Rosewood Pen

Richard Allen

>There is a nice article in the latest "Woodturning Design" magazine on making pens simular to this.

Re: Rosewood Pen

#5

Re: Rosewood Pen

Jim Shaver - Oakville, Ontario

>Hi Richard,

I will be sure to look that article up when I get my copy in the mail.

Take care,

Jim

Re: Rosewood Pen

#6

Re: Rosewood Pen

Jim Shaver - Oakville, Ontario

>Thanks Carole,

I appreciate your kind words....I like it too...I converted it to a roller ball pen today and used it at work. The feel was just right for my hand...I am going to try this on a slimmer pen...maybe even experiment with the lenght of the tail....hmmmm, I am having fun!!

Take care,

Jim

Re: Rosewood Pen

#7

Re: Rosewood Pen

Jennifer@Indy.USA

>What a classy looking pen Jim. It looks like it would fit perfectly in the hand too.

Nice one!

:)

Re: Rosewood Pen

#8

Re: Rosewood Pen

Rusty Miller

>Jim,

Great looking pen. I really like the closed end look. Made a couple myself. You said you would try to turn one a little thinner. My first one was out of mesquite and I turned it pretty thin. Well I just happened to drop it a few days after I made it and the lower body cracked. It was right at the end of the brass tube. I went ahead and broke it the rest of the way and the hole in the blank at that point was only about 1/32 thick. So, don't turn it too thin.

Again, great job as always.

Rusty-Tye, TX

Re: Rosewood Pen

#9

Re: Rosewood Pen

Jim Shaver - Oakville, Ontario

>Thanks Jen,

It does feel good in my hand, I wrote with it most of yesterday, it felt nice indeed

Take care,

Jim

Re: Rosewood Pen

#10

Re: Rosewood Pen

Jim Shaver - Oakville, Ontario

>Hi Rusty,

I am glad you are enjoying them too!

One thing I have found, without the need for a full length tube I an drilling down about 1 3/4 inches deep at the full diameter into the pen body and only using about 1 inch of tube. Then I step drill with a 7 MM drill to 2 7/8 inches deep to accomidate the roller ball cartidge and spring. Using that step drill process gives me nmore design options at the tail and also gives more weight to the pen.

I think I saw that on IAP somewhere, some one posted a diagram, they did it fifferently that I do, but they drilled to about 2 1/8 at full diameter, but you don't need that much depth for a foutain pen cartridge, some people use pumps, but I measured them out to about 1 3/4 inches at most.

take care,

Jim

Re: Rosewood Pen

#11

Re: Rosewood Pen

Rusty Miller

>Jim,

Great idea! I used the diagram you are talking about and drilled to 2 1/8 than drilled on down with a 1/4 drill to allow for the spring and rollerball cart. I also found that 1/4 is a little small for the spring, so I started using the next size up. Work much better.

I think your idea of drilling shorter and using a shorter tube will work very well for either a rollerball or fountain pen.

Thanks for the suggestion.

Rusty-Tye, TX

Re: Rosewood Pen

#12

Another Point To Keep In Mind

Jim Shaver - Oakville, Ontario

>Hi Rusty,

I'm glad that helped....keep in mind also, that if you are using a pen mill to square the tubde and surface that the mill guide will not go full depth, you will need to get another barrel guide and shorten it accordingly.

:-)

take care,

Jim