Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

tiny ripples

Posts

tiny ripples

#1

tiny ripples

gary s clarke

>I had a bowl that had tiny ripples on the exterior and I have done lots of bowl and never had this happen before. These could be felt but not seen. Is it the the heel of the gouge bouncing or something else?

what is the best way to keep this from happening? thank you in advance.

Re: tiny ripples

#2

Re: tiny ripples

Sean Troy

>The only way I have ever been able to get rid of the ridges is to turn up the speed, hold the handle down and make a very light shear cut.

Re: tiny ripples

#3

Re: tiny ripples

Carole Valentine

>What kind of wood, Gary?

Re: tiny ripples

#4

Re: tiny ripples

gary s clarke

>jatoba

Re: tiny ripples

#5

Re: tiny ripples

Phil Joines

>Sounds like harmonic chatter. As Sean said turn the speed up or down a bit and take lite cuts.

Re: tiny ripples

#6

Re: tiny ripples

GaryG in MD

>Gary,

According to www.exotichardwoods-southamerica.com/jatobabraziliancherry.htm, jatoba sounds like it has many characteristics similar to oak and locust -- mainly moderately course texture. Is it possible you oversanded the piece? The soft grain sands out easier and leaves depressions. Oak, for example, is very bad this way. DAMHIK! Just a thought.

Avoid a shiny, reflective finish. Just use a few coats of Watco, buffed lightly and you'll never see them.

Gary

Re: tiny ripples

#7

Re: tiny ripples

Bill Hale

>Gary

I was not aware of this sight and do appreciate the info.

Bill in Casa Grande, AZ.

Re: tiny ripples

#8

Those are not ripples, you are going blind.

Barry Irby

>

Re: tiny ripples

#9

Re: tiny ripples

GaryG in MD

>Hi Bill,

Yes, I find it to be a very useful site for getting information on various exotic woods. I found it while researching toxicity. Glad you like it.

Regards,

Gary

(born in Bisbee)