Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

need source for vacuum line filter

Posts

need source for vacuum line filter

#1

need source for vacuum line filter

dick mc neill

>I made the vacuum chuck system written up in Woodturning Design

magazine. Unfortunately the articles source for the in-line filter (Surplus.com)no longer has any filters. Does anyone know of another source, idealling one that doesn't involve mail order. Thanks

Re: need source for vacuum line filter

#2

Yes, but *LINK*

Mike Cunningham (Cape May)

>it's mail order


McMaster-Carr

Re: need source for vacuum line filter

#3

Auto parts store

Bob Hackett(Mainely,Bob)

>Get an inline fuel filter and put it on the vent(intake) line just before the ball valve you`ll use to adjust vac pressure.

If you want to go all out then go to a hotrod (or custom bike) shop and get a glass bodied one so you can see when the element needs to be changed.

MB

Re: need source for vacuum line filter

#4

Re: need source for vacuum line filter

Dinyar Chavda

>Dick:

I made my own filter, using the approach shown in Bill Noble's article on vacuum chucking. Basically, he recommends using some large diameter galvanized pipe (for example, 2 inch) filled with cotton wool or wadded up filter medium or even a rag. Put a cap on each end and drill and tap the cap for � inch pipe (or use a

reducing fitting. I used the filter medium (it's what's used to put on heat registers in your house), and used a reducing fitting. Put one on the line leading to the chuck, and also one on the output line, which, in addition to acting as a filter, also acts as a muffler.

Seems to work. Periodically, you can open it up and see if it needs changing.

Re: need source for vacuum line filter

#5

Vaccum filter

ob obrien In Pensacola

>Dick; get a diesel filter package from NAPA, reducer fittings from Home depot and you have a good filter to remove stuff down to about 1 micron and it's easily opened and emptied. Take a look at mine next time your over here. OB

Re: need source for vacuum line filter

#6

Re: need source for vacuum line filter

James McClure

>I bought an inline filter from Harbor Frieght for about $5 that's made for filtering the airline in paint spraying applicaitons. It has been working fine for me and the price was right.