Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

non battery powered dust masks

Posts

non battery powered dust masks

#1

non battery powered dust masks

T Daniel

>Barbara Gill uses the North mask and is happy with it. Some use the Respirator, some the Dust B Gone, and now we have the Trend Ace. Can those of you who use a non powered mask post the data on each and whether you like it or not. The info I have on the Trend was posted last week but here it is again for those who missed it.

Trend Ace .3 micron filtrtation. Price $72. Works well with glasses. Virtually eliminates dust in nose.

Re: non battery powered dust masks

#2

Re: non battery powered dust masks

David Breth

>I use the north 7700, and like it. If I had to do it again, I would get the larger size though - I get a good seal, but my giant sniffer is perpetually in contact with the mask, so it gets red. When I turn a lot I look like a drunk.

The mask is pretty comfortable, lightweight. It does not obstruct my faceshield, glasses, or hearing protection.

But I'm still investigating dust collectors. I've narrowed it down, but just can't quite pull the trigger on one over the other just yet. I want to do that "right" and do it once.

David B.

Re: non battery powered dust masks

#3

JL

Re: non battery powered dust masks

JL

>I have two which are hold overs from the days when I did environmental remediation.

3-M half face respirator - equipped with acid/gas cartidges and a dust abatement prefilter. Comfortable (I have worn it all day). Can be worn with safety or other glasses. I figure if it will keep out gases, it will keep out dust.

3-M full face respirator - equipped with acid/gas cartidges and a dust abatement prefilter (also known as an asbestos prefilter). Uncomfortable, cannot be worn with glasses.

Re: non battery powered dust masks

#4

Re: non battery powered dust masks

ben d.

>I have visited their web site and gotten the people that is supposed to handle the trend air and the model I believe that you said you purchased was the trend air ace 1 which none of them have. They do have other models of the trend air but do not mention this model.

For those of us that cannot connect The name of the company, address and phone where to contact that you made your purchase would be most helpful in locating this respirator.

Re: non battery powered dust masks

#5

non battery powered dust masks - "resp-o-rator"

John U - Charlotte, NC

>I have the Resp-o-rator, and am "ok" with it.

* Can wear with glasses, safety glasses, face shield, hearing protection, etc.

* The mouthpiece, used similar to a scuba mouthpiece, didn't take much time for me to get used to.

* The mouthpiece, back tubes, and back-mounted filters are all easy to take apart and clean.

* The tethered nose clip I still have troubles with - just can't seem to find the right pressure that I'm comfortable with. Just personal preference though.

* When you first start using it, you may slobber all over yourself. Saliva does build up, and with your mouth clamped around the mouthpiece, you tend to swallow differently. If you slobber, it will end up covering the front of your shirt/smock/apron - cover that with sanding dust, and you have a nice paste stuck to the front of you. You should overcome this problem though, and stop slobbering on yourself. My first impression was really low because of this.

* The neck tubes leading to the back-mount filters are flexible, but if you have a large neck, they will give constant pressure on the sides of your neck where they bend around it. I feel it most when I'm turning my head to see who came in the garage when I'm working.

* Spare filters are easy to get, at least in a city - Klingspor's and Woodcraft in Charlotte both carry them. I see them in the woodturning catalogs.

* Filters do seem to work - dust collects on them, and I'm not seeing the dust when I blow my nose, etc.

Overall opinion - neutral. It may be better suited for some people, but not others.

Would I buy it again if I had to? Likely not. I work in the environmental field, and am properly fitted and trained on wearing full and half face respirators - either one of these would be my choice for my next purchase of a non-powered device.

Re: non battery powered dust masks

#6

Re: Resp-o-rator

David Propst

>Hi John,

I have the resp-o-rator as well and I agree with your review completely. It works well, but I rarely use it because of the "drool factor" you so aptly describe. It makes make salivate like I was rabid.

Best Regards,

David

Re: non battery powered dust masks

#7

Can any of these be used with a faceshield?

David Propst

>

Re: non battery powered dust masks

#8

yes

T Daniel

>according to Terry Cole from Trend who I talked to at the show it can be worn with a full faceshield; however, I have not tried it with one. It does work well with glasses. Hapy Birthday David!

Re: non battery powered dust masks

#9

source

T Daniel

>I bought mine from the Stone Mountain Power Tool / Kentec booth at the Atlanta Woodworking Show last week-end. Terry Cole with Trend told me that it would be available from Highland Hardware in Atlanta as well.

Re: non battery powered dust masks

#10

Re: non battery powered dust masks

Stuart Johnson

>I use 3M 6300 half face mask. The 6000 series is 6001 small, 6002 med and 6300 large. I was worried about the size but with the proper filters I had no sense of smell when spraying lacquer. I use the pink 2091 hepa filter for sanding. It fits under a face mask with no problem and there in no glasses fogging.

Re: non battery powered dust masks

#11

Yes on North Too

Barbara Gill, Remlik VA

>

Re: non battery powered dust masks

#12

Barb, questions:

T Daniel

>Do you know the price of the North? Are there filters for it for spraying paint?

Re: non battery powered dust masks

#13

price?

T Daniel

>

Re: non battery powered dust masks

#14

Re: Resp-o-rator

David Breth

>You guys make it sound so appealing. :')

Re: non battery powered dust masks

#15

Re: price?

Stuart Johnson

>I'm not sure but I think it was around $10 may $15 when I bought it with the vapor filters. The hepa were maybe $5. I bought mine at Ace Hardware.

Re: non battery powered dust masks

#16

dust b gone

Ed Kelle

>I've used it for almost a year, mostly when working off the lathe. It fits around your nose snugly with a bendable wire to prevent most fogging with glasses. I still get some, and more so when I use it under a facesheild. I turn and sand on the lathe with my Trend, but when spending hours with a dremel, I like the quiet and low weight of the dust b gone. It is washable, plus if you get hot you can wet it to be a little cooler. Its about $38. It is a nice option to have, I am more likely to throw this on than just go without anything at all.

Re: non battery powered dust masks

#17

Re: Barb, questions: *LINK*

Carole Valentine

>I am not Barbara, but I have a North too. Prices vary depending on the model and the filters you purchase. The 7700 is about $22 (not including filters) and the 5500 is $10 without filters. I use the little pancake filters (forget the part#...P100 maybe?) You can get cartridges to filter just about anything you can think of.


RJ Safety Equip

Re: non battery powered dust masks

#18

This looks a little like the Trend *LINK*

Carole Valentine

>NORTH 7190N99

Scroll down the page on the link to see it.


http://www.rjsafety.com/RS5.html

Re: non battery powered dust masks

#19

Re: Do you wear a respirator or use dust/ambient

Jill

>Just wondering. If you use a respirator do you also use a dust collector and/or ambient air filter? I have heard of some just using a dust collector and ambient air filter NO respirator. I think it is far safer to use a respirator than a dust collector. Any thoughts? Can anyone direct me to information on dust particle sizes that the respirators filter. I know what collectors and ambient filters handle.

Re: non battery powered dust masks

#20

Both

T Daniel

>The dust masks will protet you best from the dust because they filter down to .3 micron whereas the hanging filters are generally about 2 micron. The hanging filter is good at cleaning the air so that when you remove your mask you won't be breathing all that floating dust that may take a few minutes to settle. If you wore the mask the entire time you were in the shop then it would be all that you would need, however, most of us take it off soon after we stop sanding or turning. A dust collector contains the big chips and such but most of them do very little toward removing fine dust particles. The newer cartridge type filters trap particles down to about 1 micron but the bags are generally 5 microns at best. Any dust that you remove has to help so you should not put off any dust system until you can afford the best. Start with the best you can afford and build to it. The simple mask is the best place to start.

Re: non battery powered dust masks

#21

Re: Both

Allen Neighbors

>TD, I have to say, that I don't always use my dust mask all the time, because it doesn't fit under my face shield, and I also have a beard, and can't get a perfect seal. So unless I'm really into some bad wood, it just hangs there on it's hook.

However, I took an old central heating and air conditioning blower, and built an air cleaner that hangs about 10 feet from where I turn and sand. I built it so it draws air through four 20x25 filters. I forget the micron size of the blue filter...

When sanding, I also have a fan that blows past my left shoulder onto the piece I am sanding, and towards another fan that exhausts out the window. Very little dust, hanging around in my shop... none that you can see.

But I'm not naive... where'd all that dust all over everything else come from???? :o)

I appreciate all that I learn from you and the other's that post here in WC.

Allen

Dry as dust, in Childress, Texas

Re: non battery powered dust masks

#22

Re: non battery powered dust masks

Pat Mulligan

>I use a dustfoe 66 respirator- been using it for years while renovating old plaster walled houses.Just found a spare on ebay for 10.00,that's a great price.