Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

A platte & art form from one piece of wood.

Posts

A platte & art form from one piece of wood.

#1

A platte & art form from one piece of wood.

Eddie Pacheco; San Jose, Ca.

>I bought a 22" x 10.5" x 2.5" Cherry cuttoff from a local lumberyard last week and these are the two items that came from it.

The platter ended up going to a friend of mine and the dimensions were 10" dia. x 2" high x 3/16"'-3/8" wall thickness. With the thicker thickness at the bottom. The finish was just mineral oil in case his wife wants to use it for holding fruit ot something.


img

Re: A platte & art form from one piece of wood.

#2

Platter pic 2

Eddie Pacheco; San Jose, Ca.

>Here is the side view profile. The pictures were taken outdoors with just sunlight.


img

Re: A platte & art form from one piece of wood.

#3

Art form pic.

Eddie Pacheco; San Jose, Ca.

>Here is the second piece I got from my blank. This one is also 10" dia. x 2" high with the poscket being about 1.75" deep. This is a copy of a piece that was posted here early this month. I went this route to save the inclusion and to give me chance to practice the small bead around the rim of the recess to see if I could get a sharp defined transition line from flat to bead. I used my 1/4" gouge to carefully create that bead and it come out with a very smooth surface. I sharpend my tools before doing this and overall I didn't need much sanding at the end. However, I did use a ROS on the flat surface to speed things up a bit. I final sanded with the Abralon UF pad and applied a coat of Danish Oil. I did the no-foot treatment to the bottom.


img

Re: A platte & art form from one piece of wood.

#4

Art form pic. 2 profile

Eddie Pacheco; San Jose, Ca.

>Heres the side view of the piece. I took these pictures this morning and that's one of my shop helpers in the background guarding my work.

Thanks for looking.


img

Re: A platte & art form from one piece of wood.

#5

Re: Platter pic 2

bob davis

>very nice eddie

Re: A platte & art form from one piece of wood.

#6

Re: Art form pic. 2 profile

Bill Hale

>Looks like you have a shop buddy in the background.

Bill in Casa Grande, AZ.