Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Consumables

Posts

Consumables

#1

Consumables

John Lucas

>I was discussing an unrelated topic with another artist this morning and remembered something that has made a big difference in my turning. One day I was turning ahd noticed that one of my gouges was getting quite short. Then I realized how old it was. It made me realize that even if you sharpen a lot it still takes a while to use up a bowl gouge. That's when the realization hit me that turning tools, grinding wheels, and sandpaper were all consumables. That is, you use them up in the process of making things. This created a freedom to sharpen as much as necessary and to use whatever sandpaper was necessary to do the job right. My turnings improved almost immediately. Since my tools are much sharper I use less sandpaper so I think it all balances out in the end. I do go through grind stones faster but they still last several years. At $29 to $39 apiece that still comes out to about $20 or less per year. Well worth it for a sharp tool.

Re: Consumables

#2

Re: Consumables

Ron in Drums PA

>I agree

Did you ever stop to think that a $60 turning tool lasts allot longer than $60 worth of sandpaper

Re: Consumables

#3

Re: Consumables

Bill Howatt

>Totally agree and I have often said if a person's gouge is the same length as it was a few years ago he/she isn't turning or is having a bad time turning with a dull tool. Same applies to grinding wheels. I have friend's who brag about how long their (grey) grinding wheels are lasting. Can't tell them that they would grind a lot better if they dressed them.

Bill

Re: Consumables

#4

Re: Consumables

Ken Grunke from SW WI

>Funny how you don't realize how much you've ground off a tool until it gets too short. I never bothered to measure the tools I bought when new, so I have no idea how much I've ground off of them. But looking at them now, I hope to expect at least a couple more years, unless the steel isn't properly hardened down that far.