We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>OK here's one I roughed this morning from box elder. It had a very rotten place in it. I don't know why I continued to rough it out. I guess I look at it as a challenge. I'll put it up to dry and then later on try and figure out some unique way to save it.
These are always fun but I don't know why I do it. They are always very time consuming to save and I lose money on them. I guess I just enjoy the challenge. Anyone else ever do that?
>A couple nice big flat rocks will turn that sucker into a piece of aaaaaaahhhhhhhhhht......I cant resist doing that all the time....its a real challenge...give the rocks a try....
>Do it all the time John. I figure like you that it is a challenge and a learning experience. When they are dry it gives me something to practice with (carving, burning, texturing, beads, coves, etc.) and once in a while it could end up as a piece of �Art�. I have a pot on the lathe now I�m sure I hollowed too deep, (I definitely have to make a better depth gage for the bottom corner), I am completing everything as if it will make it. I will find out after lunch but I�m sure it is trash. But wait, from the previous post I can cut in two and learn something so all is not lost!
>I think that is one of the growth things we go through. Actualy acting on what we know. Which is, it is better to impose your ideas on the pieces of wood than the wood dictating what you have to do.
I still find myself roughing wood that should be discarded. But I work on less bad wood than I used to.
I may be missing out on oportunities. But there is to much good wood out there to spend time on wood like that.
>I always try to use the best wood I can find, hoping of course, that there's no way I would screw up an expensive piece of wood. Sometimes it works, sometimes not.
>I think Richard Raffan borrowed the saying from John Jordan. In his DVD, John Jordan says "Life's too short to turn crappy wood" (although he did say it a little courser originally).
Richard likes to say "Woodturning brings out the vandal in us all".
John, your piece looks like both sayings could be applied. I'm sure you're artistic enough to come up with a "creation" out of this "possible trash". Yes, I do this too, however mine usually end up as firewood.
>When YOU take such a piece as that and work some magic on it, it looks like art and I marvel at your creativity and technical skill. I wonder where you sell it and for how much. I do the calculation and wonder if I could replace my present income with income from such art. Would my life be more fun if I could take such crappy wood and earn a living from it?
When I take such a piece of wood and work MY magic on it, it still looks like a piece of crap that I tried to save and couldn't. When I blow up a turning, I grieve. My son just looks around and says "I gotta get another piece of wood. Either I need better magic or I should cut my losses sooner.