Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Photography experts, I need some help

Posts

Photography experts, I need some help

#1

Photography experts, I need some help

Chris K in MD

>I am trying to photograph a new platter that I made from some very highly figured (fiddle back, tiger) maple. I am having difficulty capturing just how impressive the grain is. Pictures low to the piece really pop the grain more but the platter obviously looks oval. Straight on shots I loose alot of the grain but the piece looks natural. Can you offer any suggestions?

I will post three different shots

TIA for your help!

Chris


img

Re: Photography experts, I need some help

#2

Re: Photography experts, I need some help

Chris K in MD

>Second


img

Re: Photography experts, I need some help

#3

Re: Photography experts, I need some help

Chris K in MD

>Third


img

Re: Photography experts, I need some help

#4

Re: Photography experts, I need some help

Jim Shaver - Oakville, Ontario

>Hi Chris,

First things first, that is an incredible turning on a wonderful piece of wood...wow factor 10!

I would like to see your lighting set up, have you tried to move the lights more to a 45 degree angle of incedennce from both sides? I would try and hook up a monitor to your digital camera and play with teh lighting till you see the grain pop. I would also play with bracketing your exposures to see if you can highlight the right exposure from your camera's meter.

Most of my work is on a macro scale for my camera also my lighting is different is some ways, the distance and angle of the incedent light to the image control most of the variables outside the camera for me.

I know John Lucas will hopefull come in and give all some of his excellent words, I respect his skill and comments on topics like this...so that was my 2 cents, hopefully we can all observe the responses and learn from it.

Again Chris, wonderful piece.

take care,

Jim

Re: Photography experts, I need some help

#5

Re: Photography experts, I need some help

John Lucas

>I'm here. I had to take a break from roughing out bowls and eat some lunch. The trick for shooting curly maple and other such woods is to use some direct light, or at least more direct than just the photo tent or very large bounce cards. Soft boxes, photo tents, umbrellas' and large bounce cards don't show off the figure in the wood. These are called soft light sources or in non photo terms, large light sources. To make the grain pop you need at least one small light source such as a 12" reflector. This is called hard light. The problem with hard light is it causes reflections and hard shadows(Hard light)

What I would try to do is place one of your lights fairly close to the fabric (don't start a fire) Set the platter up so it faces the camera, more or less and then place the light up high and to the left but close to the fabric. Sometimes this will create an effect similar to a small light but still give you enough bounce light to have an overall nice shot. You will have more shadow but the reason a small light shows the figure better is each tiny chunk of grain produces it's own shadow.

I usually use a 6 to 12 inch light to light pieces like this and then use large lights to reduce the intensity of the shadow. This is usually hard to do at home. I have probably $20,000 worth of lights and gadgets to play with at work which makes the job easier.

Re: Photography experts, I need some help

#6

help

John Lucas

>I forgot to mention. If you still have problems send me a photo of your set up so I can see the details of what you are doing and I will be able to make better suggestions. You could also post them here if you think others might learn from it.

Another trick is simply boosting the contrast in your software. Sometimes all it takes to get grain to pop is raising the contrast on the image and maybe applying some sharpening if your software has that.

Re: Photography experts, I need some help

#7

Re: help

Gerry Meekins in Maryland

>Chris,

What John said! That said and knowing your photo setup.. Try using a lower wattage bulb pointed from the same direction as the camera or off to the left side. I would use a plate holder and set the piece upright so it doesn't go oval on you. (Experiment!) You're probably going to get a hot spot somewhere on the rim. Just move the light a bit till it's not so bad. This is a condition where indirect lighting just won't cut it.

Hope this helps,

Gerry

Re: Photography experts, I need some help

#8

Out-Of-Focus ? ? ?

Barry Turner

>Chris, I'm certainly no phography expert, but I believe you will find that all three photos are slightly out-of-focus.

Re: Photography experts, I need some help

#9

Re: Out-Of-Focus ? ? ?

Ron McKinley

>Barry is right. All are slightly out of focus which softens everything. John Lucas is "right on" about direct light needed to bring out the grain. The direct light should be just above the level of the bowl to "rake across" the grain. Also, every digital picture, whether from a scan or digital camera, needs tweaking. Usually all you have to do is set the "levels" or "curves." I find the levels are easier and I can work with all three colors�red, green and blue�but many prefer working with the curves function. I use Photoshop but there are many other software programs that have that capability.

Your photography might need a little help but that is beautiful work! Thanks for sharing.

Re: Photography experts, I need some help

#10

Re: Out-Of-Focus ? ? ?

Barry Turner

>I said I was no expert......can't even spell the word "photography".

Re: Photography experts, I need some help

#11

I would try something else

Guy in Cuba

>John has some suggestions on lighting and angles. From looking at your pictures, my initial thought was that you needed a polarized filter. With the curves in the bowl, I am not sure changing the positions of the lighting will ever get rid of the shadows and reflections. Using a filter or set of filters should help though.

Good luck, Guy