Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Bandsaw pulleys

Posts

Bandsaw pulleys

#1

Bandsaw pulleys

Steve Woodall

>Hello,

Does anyone know what size pulleys are supposed to be on a 14" bandsaw?

I have an older model Rockwell model 14, I have been cutting blanks with it lately and it seems a little slow.

It also seems to stall very easily aven though it has an older 1 hp motor.

I am using 1/2" 4 hook tpi. Does that sound like the right blade for cutting blanks round after they are slabbed?

Thanks for any input,

Steve

Re: Bandsaw pulleys

#2

Re: Bandsaw pulleys *LINK*

Mike Cunningham (Cape May)

>I assume the saw cut fine in the past. Therefore I'd suggest your problem lies with the blade. Try a 3/8" 3 tpi AS Timberwolf from Suffolk. I'd also check the belt tension on the pulleys and if the saw is stopping in a cut don't overlook the possibility of a bad capacitor on the motor.


Suffolk