Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

One maple down, one to go.

Posts

One maple down, one to go.

#1

One maple down, one to go.

Al Crandall (NE of Indy)

>In the truck is the last of the hard maple from a neighbor's tree which I bartered for. He talked the power company into felling them, but he didn't know how he was going to get the mess cleaned up. He agreed to let me take all the wood I wanted if I would clean up his yard of all the branches. There is still another maple on the ground which I haven't started to dice up yet. I'm running out of storage space. I hope I can talk some of the local club members into taking some. I seem to be able to harvest faster than I can turn. The carpenter's framing square hanging on the log in the middle is for scale.


img

Re: One maple down, one to go.

#2

That's just a dang pretty sight!

Molly Winton

>

Re: One maple down, one to go.

#3

Re: One maple down, one to go.

George Van in WI

>Nice haul Al, looks like you will be busy for a while!

Re: One maple down, one to go.

#4

Re: One maple down, one to go.

Jennifer@Indy.USA

>Nice Haul, Al!

My back hurts just looking at the picture :)

Jen

Re: One maple down, one to go.

#5

SWEEEEEEEEEEEEEEEET!!!!!!!!!!!

RevDoug

>

Re: One maple down, one to go.

#6

Re: One maple down, one to go.

Michael Stadulis, in Gloucester County, NJ

>Al, Please explain who's the maker of your hoist rig. Looks like a good setup but, unfortunately, I need a truck too.

;o)

-Mike

Re: One maple down, one to go.

#7

Re: One maple down, one to go.

Doug Trembath

>Al, if that piece is still on the truck, bring it on out, and we'll cut 'er up! That looks like the best piece. Nice haul!

Doug Trembath

Studio in the Woods

Re: One maple down, one to go.

#8

Nice!!!!

Ron in Drums PA

>

Re: One maple down, one to go.

#9

Re: One maple down, one to go.

Terry Quiram, Roanoke Illinois

>Al

Nice haul. Hard Maple is the best. I have a suggestion. You and Ray Thompson could take a little road trip and come for a visit. I would be glad to turn some for you.

Terry

Re: One maple down, one to go.

#10

Re: One maple down, one to go.

JKJ in East TN

>>...I seem to be able to harvest faster than I can turn.

That seems to be a common problem! My firewood pile is getting some nice pieces these days. A neighbor gave me a large walnut today and there's no way I can turn even a fraction of it. Then he is going to cut two more and doesn't want any of the wood. I'll saw some into boards, but much will see the inside of the wood stove next winter. Anyone for walnut crotches? It seems a shame that some of us have too much wood at times and others could really use it if there was just some good way to move it.

But that's a nice haul! And your pictures remind me again of how handy a truck crane would be. I need one for my flatbed truck, but I need one with more range since the bed is so high. I'm working on a design for a swing crane made from some 4" schedule 40 pipe and a 1 or 1.5 ton chain hoist on a piece of I-beam welded to the top. That would save hauling the tractor around just to load some big pieces!

JKJ

Re: One maple down, one to go.

#11

Nice haul!

Craig Daymon

>Looks like a nice stockpile. So, based on the bottle sitting on the log, did you seal the wood with Ranch or Blue Cheese dressing? (You might want to buy your dressing at Sam's or Costco since it looks like you need the BIG BOTTLES!

-Craig

Re: One maple down, one to go.

#12

Re: My own design using Harbor Freight parts.

Al Crandall (NE of Indy)

>The hitch mount for the assembly is my own design and fabrication. It was published in the tips page of the AAW magazine about a year ago. The crane is off the shelf from H.F. with a pulley stuck in the end. The 12v. winch is H.F, as are the two crank down jack supports. I posted four pictures here at W.C. late in December showing how I mounted the winch and pulley without modifying the crane.

The biggest piece in this haul is 28" d. x 28" l., or nearly 10 cu. ft. of green hard maple. Not sure of the weight, but its a bunch.

Re: One maple down, one to go.

#13

Re: Come on over. I'll send a bunch home with you.

Al Crandall (NE of Indy)

>HI Terry. I'm looking for some takers. My eyes were bigger than my storage space.

Re: One maple down, one to go.

#14

Re: I love squirting anchor seal. No spills.

Al Crandall (NE of Indy)

>

Re: One maple down, one to go.

#15

Re: One maple down, one to go.

Larry In Lima

>That's some beautiful looking wood there.

Some of you mentioned having too much wood... wish I had THAT problem. I've got little space, but even that isn't full of wood. An idea for some of you might be to post here (as I know has been done in the past), maybe get a little free help with cutting / moving / loading in exchange for cutting some for someone else. I know I"d LOVE to find someone in my area with the tools and wood to cut, help them out for a day or two and get a little stash.

I live in Kornfield Kounty Ohio, and haven't found anyone in my immediate area who is also into turning, much less cutting their own. Anyway, an idea - Larry

Re: One maple down, one to go.

#16

Re: One maple down, one to go.

JKJ in East TN

>Larry,

Is there a turning club in your area? That's a great place to meet people and trade resources. People bring wood to every club meeting here. Isn't Lima close to Columbus? - there must be a club there. I suspect the nearest Woodcraft store will know about local clubs.

Do you ever head south on 75? If you find yourself driving through TN one day, look me up and you can take home some wood. I hauled in well over a ton of walnut today and have chunks of maple, persimmon and others that will probably rot before I can get to it. I'll gladly put you to work! I could bring a few chunks the next time I come to Marysville to visit my brother, but it probably won't be until summer or fall. (He wants me to bring him a load of trees to plant - central Ohio is certainly short on trees compared to around here!)

JKJ

Re: One maple down, one to go.

#17

Re: One maple down, one to go.

Larry In Lima

>A turning club in my area would be great, but Cincinnati (almost 2 hours) is the closest one I can find. Dayton is 2 hours away as well. Not good... I do get south sometimes, even to Marysville a few times, but not as far as TN. If you think about it and you know you are coming up, feel free to email me. Thanks again - Larry