Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

a gloat and a question

Posts

a gloat and a question

#1

a gloat and a question

LT

>Couldn't resist the urge to upgrade any longer...just ordered a Powermatic 3520B!

A couple of questions...

Does anyone know if it comes assembled or unassembled? I 've talked with three different people at Powermatic and gotten two different answers.

Also, does anyone have one on a mobile base?

thanks

Re: a gloat and a question

#2

Re: a gloat and a question

Dennis Y

>Mine came in a box with the head and tail stock and tool rest mounted on the bed. The legs were attached to the bed. A box containing all the misc pieces was below. I would classify it as assembled. It all comes apart easily if you need to get it down stairs. Enjoy your new toy. Dennis Y

Re: a gloat and a question

#3

Re: a gloat and a question

John Lucas

>LT all of the 2035A's that I know of came fully assembled in a very big box. You either need 4 big guys or you have to at least partially dissassmble it. The pieces are very heavy so get some help. John

Re: a gloat and a question

#4

Brad Vietje

ME TOO ! Ordered the 3520B Today...

Brad Vietje

>Too Cool ! I just ordered one today, too, and interested parties ought to know that the end-of-year special pricing that "ended" 12/31 has been extended to 1/31/06, so there are still a few days left. I ordered mine at $ 2799.99 w/free shipping from a dealer here in Vermont. When it comes in, he'll set it up on his shop, and I'll go up and do a Saturday promotional demo on it, then he'll deliver it to my shop ... we're calling it $2800, including the 1 cent for shipping ... now that's service !

Looking foreward to finally having a real lathe, as the 1236 was just not up to my needs. To be fair to all the dedicated 1236 fans out there, I think I got a real lemon ! Oh, my, I just can't wait in my mind, but since my new shop isn't built yet, I'll just have to get busy !

Safe Spinning,

Brad Vietje

Newbury, VT

Re: a gloat and a question

#5

Brad......

T Daniel

>You really needed a bigger/better lathe. The work you accomplished with your 1236 was remarkable. You are like mark Kauder when I first met him; you both were doing awesome work on very basic machines and I think the lack of machinery was holding both of you back. Enjoy the new lathe! We look forward to seeing some really nice stuff coming from it/you.

TD

Re: a gloat and a question

#6

Re: a gloat and a question

Chris K in MD

>You can download the manual here and it shows you what you have to do. Powermatic no longer ships the unit with the legs installed (they learned thier lesson from all the units that got damaged from tip overs) A friend of mine recieved one a few weeks ago just as they have it in the manual.

http://www.amazon.com/gp/product/B0000225RT/qid=1138164320/sr=1-8/ref=sr_1_8/102-9758532-0451337?_encoding=UTF8&v=glance&n=228013

Congrats! You'll love the lathe, I own a 3520A

Regards,

Chris

Re: a gloat and a question

#7

Brad Vietje

Flattered at the Comparison -- Thanks !

Brad Vietje

>

Re: a gloat and a question

#8

Re: ME TOO ! Ordered the 3520B Today...

LT

>Congrats on the purchase! I am really looking forward to turning on mine once it gets here, after having turned on my harbor freight for a couple of years. I ended up ordering mine from toolnut w/free shipping.

Ironically, it was my mother who decided I needed a bigger lathe!

Re: a gloat and a question

#9

Re: a gloat and a question

LT

>Thanks, Chris...I downloaded the manual.

Re: a gloat and a question

#10

Christmas in Januweary!

Jennifer@Indy.USA

>Congrats to both of you! Don't ya just love waiting on new tools!

Smiling for both of you :)

Jen

Re: a gloat and a question

#11

Mine arrived disassembled

Shawn - in ID

>Mine came in one large rectangular box. The headstock and tailstock were on the bed. The legs were not attached - they were wrapped individually in cardboard and packed on either side of the bed. I just carried the legs one at a time to my basement, then the tailstock, then headstock, and then used a dolly to get the bed down steps.

Re: a gloat and a question

#12

Re: Mine arrived disassembled

LT

>Shawn,

After you connected the legs to the bed, how did you get it right-side up?

thanks

Re: a gloat and a question

#13

Re: ME TOO ! Ordered the 3520B Today...

Sue McLam in Orange, VT

>Hey Brad,

Let me know when the demo is going to be...I'd like to go! I assume it's in Montpelier???

Sue

Re: a gloat and a question

#14

Re: Mine arrived disassembled

Bruce

>My 3520B was also unassembled in a box. Once I had the legs on, my wife and I turned it over. I recommend a couple of large fellers to help. I had a harder time putting the headstock back on.

~b

Re: a gloat and a question

#15

Re: Mine arrived disassembled

Shawn - in ID

>Lay down something protective on the floor (I used the cardboard the legs were in), put the bed upside down on this. Attach the legs, then lay it on it's side, then stand it up (basically just roll it over). That's easy and could be a one-person job (depending on the person). The headstock, as mentioned, is the tough bit. Since there is no good way to set it down. When I carried it into my basement, I set it on a board upside down (the only flat side on it is the top). Lifting it up and maneuvering it to get it into/onto the bed is a challenge and having a couple of people would probably help. If you have a roll-around table that can handle the weight, here is what I would suggest: Get a board or slab of wood ~3 inches thick and cut a U out of one side - this is so that you can place the tailstock on it, resting on its base as it should and have the compression washer/etc. sit in the slot you made. Then, when you take the headstock out of the arrival crate and off the bed, you can set it right-side-up and be able to wheel it close to the bed. Set up your bed with legs, then wheel up the headstock and move it over (by yourself or with help).

Re: a gloat and a question

#16

Brad Vietje

Re: ME TOO ! Ordered the 3520B Today...

Brad Vietje

>Hey Sue,

Yup, Spooner Specialties it is -- Route 2 in Montpelier. I didn't ask exactly when he expected it (since I can't properly house it just yet), but David was putting in a Powermatic/Jet/WMH order early next week (the end of January is Tuesday), so I would expect it by March 1 (?)

I have a big barn, in which I'm framing up an office (darn day job) that will eventually be my turning shop. As soon as its tolerably warm, I can set up the lathe in a temporary shop space here -- probably closer to April. I think it will rust a lot less at Spooner's till I have a heated place to put it.

All excited,

Brad Vietje

Newbury, VT

Re: a gloat and a question

#17

Re: ME TOO ! Ordered the 3520B Today...

Sue McLam in Orange, VT

>Cool...can't wait to see it and you in action!

Sue

Re: a gloat and a question

#18

Re: Mine arrived disassembled

John Irvine

>Mine came in a big box with the legs off. I pulled the headstock off along with the tailstock and put the bed on some saw horses to put the legs on so I could do it myself then I was able to slide the head and tailstocks on with it upright