Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Henry Taylor tools M4 Steel *LINK*

Posts

Henry Taylor tools M4 Steel *LINK*

#1

Henry Taylor tools M4 Steel *LINK*

Craig Daymon

>Anybody using the Henry Taylor M4 Steel tools from 'The Cutting Edge'? The price looks reasonable, considering these should hold an edge "twice as long as M2 steel".

Also, who is "Steve LeGrue" and what is special about the grinds he has designed for 'The Cutting Edge'? Can that 9/16" M4 Shallow Gouge work on that transition region from the side of the bowl across the bottom? It seems more stout that a detail gouge and just looks to me like it would work well in that region. (Of course, it should be assumed that I don't know what I'm talking about.)

-Craig


The Cutting Edge M4 Henry Taylor Tools

Re: Henry Taylor tools M4 Steel *LINK*

#2

Re: Henry Taylor tools M4 Steel

Edward

>I have some of the Henry Taylor M4 tools. I Like the tools, and the handles that HT supplies with them. I am not sure they hold a sharp edge any longer than the M2 steel. I would like to believe this to be true. I DO like the tools.

I think the 9/16th gouge is the evolution of a shallow or spindle gouge that was specially made for Bob Stocksdale(sp?) by Gerry Glaser. I bought a no-name 9/16 th M2 gouge from Craft Supplies many years ago that was advertised as a Stocksdale type of tool. The HT 9/16 is a very nice tool that will move a lot of wood. I use it mainly for spindle work, specially larger spindles (table legs etc.) Richard Raffan uses a gouge like this one when he demos spindle and face plate work.

Re: Henry Taylor tools M4 Steel *LINK*

#3

Re: Henry Taylor tools M4 Steel

Fog Tanner

>I have the M4 9/16" shallow gouge from the Cutting Edge. I use it mainly for bowls. Before that I used a 1/2" shallow gouge for getting rid of most of the wood in turning bowls. In a hands on with Raffan, he advocated the use of the shallow gouge for bulk removal as the cost of the steel was cheaper than the "bowl" gouge. I have used nothing but the 9/16" and a scraper in making some bowls.

Steve has been turning since 1984 and like a lot of turners has some "pet" grinds on his gouges. They are a little different and they do work for him, so he had Taylor make some tools with those grinds on them. I have used his tools during time in his shop and they work, it is all what you are asking of the tool.

Re: Henry Taylor tools M4 Steel *LINK*

#4

Ric Taylor

Re: Henry Taylor tools M4 Steel

Ric Taylor

>Steve is the owner of The Cutting Edge.

Re: Henry Taylor tools M4 Steel *LINK*

#5

Thanks for the feedback. Very helpful.

Craig Daymon

>