Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Best lathe for club demos

Posts

Best lathe for club demos

#1

Best lathe for club demos

Ed Moore

>We all would like to have the biggest top-of-the-line lathe for our club. That is usually said by those who neither help buy it nor must move it frequently.

Our club is not quite two years old and we want to get a lathe for demonstrations. Budget is a prime consideration. We know that we want electronic variable speed and a swing of at least 14". The obvious first thought is a Jet, but what model?

I am requesting your suggestions/recommendations.

Thanks,

Ed Moore

Re: Best lathe for club demos

#2

There is only one...

Peter Teubel

>...Jet electronic variable speed lathe with a 14"+ swing.

Re: Best lathe for club demos

#3

Re: Best lathe for club demos

John U - Charlotte, NC

>The Jet 1642 is a good one (I have one and love it), but if your club can afford it (or apply for a grant), the Powermatic might give you a little more flexibility with your planned demonstrations, particularly if you get into natural edge or winged pieces. You likely won't see many pieces turned that large for a demonstration piece though - the extra weight of the lathe is probably the more critical thing.

The 16" Jet does have "outboard" capabilities by sliding the headstock to the end (as does the Powermatic I believe), but you would need an outboard stand added to your inventory.

There are some good articles on this Site about the Jet 1642 - lathe review, building trestle legs and ballast box, etc. Be sure to take a look at these articles when considering your purchase for your club.

Re: Best lathe for club demos

#4

Brad Vietje

Re: Best lathe for club demos

Brad Vietje

>Does it need to be portable ?

Safe Spinning,

Brad Vietje

Newbury, VT

Re: Best lathe for club demos

#5

Re: Best lathe for club demos-DVR

georgetroy

>I would suggest a Nova DVR. Small Footprint, 16" swing, swivel head, 1 1/4" x 8 thread. 2 husky people can carry from place to place. Sections can be taken off and on. 1 3/4 hp operates on 110. Electronic speed range from 100 rpm on up. Great factory backup.


img

Re: Best lathe for club demos

#6

Re: Best lathe for club demos

Ed Moore

>We currently have the use of an older firehouse, which is next to the new one. We leave things in the corner and they aren't disturbed. It is necessary to move the current lathe (borrowed) about 15 - 18 feet when we set up. It is probable that we will lose the use of the current lathe in several months. That's no problem, we appreciate being able to use this lathe while we get established.

The Jet 1642 and the Nova DVR sound like good lathes for us to consider. I wonder if the AAW offer from Jet-Powermatic to clubs is still valid?

Thank you,

Ed

Re: Best lathe for club demos

#7

Re: Best lathe for club demos-DVR

Bill Neddow

>I agree with George. We just bought a DVR for our club and it is fantastic. More power and more stability than I had ever imagined a lathe of this category could have. If I didn't have a Oneway 2436, I would be buying a DVR!