Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Oneway 1640

Posts

Oneway 1640

#1

Oneway 1640

Jim Rutten

>I am looking at a Oneway 1640. It weighs 600 pounds. My wife asked me if that is too much weight for the concrete floor in our basement, and not knowing concrete I didn't have an answer. I believe it would be OK but can anyone verify this. Thanks.

Re: Oneway 1640

#2

Re: Oneway 1640

Rick Allen

>Sounds like a gloat to me. Congradulations! You are goinf to love that lathe. Yes the floor will be fine.

Re: Oneway 1640

#3

Re: Oneway 1640

Lou Krupnick

>If she's still concerned, as some wives are won't to be, you could place a 12" square 2X12 under each leg to re- distribute the loada bit.

Re: Oneway 1640

#4

Re: Oneway 1640

Bill Hale

>As long as the concrete is sound there should be no problem. My 2436 ( 1000 lbs. ) sits on my garage floor. Floor is 3 1/2 in. thick.

You will love the Oneway but go for all the bells and whistles as you may never buy another lathe.

Good turning and be safe

Bill in Casa Grande, AZ.

Re: Oneway 1640

#5

Re: Oneway 1640

Kurt From Jersey

>I think it may be too light for basement concrete! You might wanna look at the 2436! More downward pressure will keep it from walking and scratching the crete! I know your wife would hate you if the concrete got all scratched up and stuff! Just trying to save you some heart ache!!!

Re: Oneway 1640

#6

Re: Oneway 1640

Mac

>Get that lathe and never look back.......

Re: Oneway 1640

#7

Re: Oneway 1640

Don Tewell

>Or, you could store it at my place. I'll give ya a key and you can use whenever you want. My wife won't holler about the weight or the concrete.

Re: Oneway 1640

#8

Re: Oneway 1640

Michael Stadulis, in Gloucester County, NJ

>600 pounds ....spread over four legs equals 150 pounds per leg. I bet you weigh more standing on one foot!

Go ahead and don't worry about it.

-Mike