Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

wolverine sharpening system

Posts

wolverine sharpening system

#1

wolverine sharpening system

ben d.

>Finally moved up and got the wolverine system and got it all set up to their spec. and could not believe what poor condition my tools were in. I had made my own jigs to sharpen on and thought they were doing ok but found out different. I also found out how much of my tools I was grinding away for nothing. It takes very little to put the edge back on.

One thing I noticed in their instructions they recommend a 3450 speed grinder. The slow speed seems to work very well and not much heat either. Anyone else seen this in the set up instructions.??

Just goes to show I guess.

Re: wolverine sharpening system

#2

Re: wolverine sharpening system

Joe Flemig

>Slower grinders work fine. For high speed steel tools, it would be very difficult for a turner to heat the tool to the point of losing its temper. If the tool heats to a color, ease up. The best solution is to keep the tool cool as you grind. Can you dip a warm tool in water to cool it? YES! Think about a wet stone grinder. Same thing. Just don't wait for the tool to glow before cooling.

Joe Fleming - San Diego

Re: wolverine sharpening system

#3

Re: wolverine sharpening system

Bill Howatt

>Yes, I've seen it. Production turners like speed since time is money and with HSS tools overheating is less of a problem than with carbon steel. Nothing wrong with 1725rpm grinders but if I were to get a new one I would change to a good 3450rpm one.

Bill

Re: wolverine sharpening system

#4

Re: wolverine sharpening system

John Lucas

>Not me. I Just don't like the stone spinning that fast. I can't tell much difference between sharpening the tool at 3450 or 1725 so I use the slower. I bought a dual speed grinder and have been playing with both speeds for about 2 years now. I just don't see the advantage of 3450. In my mind a wheel exploding at 3450 would be much more violent than one blowing up at 1725. In reality both would be pretty nasty and in all the years I've been around grinders I've only seen it happen once. My suggestion. Just buy the best deal. If it happens to be a 1725 use that, if 3450 use that.

Re: wolverine sharpening system

#5

balancing......

T Daniel

>is almost essential on a 3450 rpm 8" grinder.

Re: wolverine sharpening system

#6

Ric Taylor

Re: wolverine sharpening system

Ric Taylor

>In a previous life I was an Air Rescue pilot in the Air Force. I flew several long-range missions out to ships at sea to pick up crewmembers who had pieces of grinding wheels lodged in their faces and foreheads. I always think of those experiences when I turn on my grinder, always use the slow speed if possible, and never stand in the plane of the turing wheel.

Ric

Re: wolverine sharpening system

#7

Re: wolverine sharpening system

Barry Irby

>It would be the "rim" speed that matters. A six inch high speed grinder would probably "feel" about like an eight inch slow speed one. Come to think of it, I have both, maybe I'll check that out.