natural edge bowls
Patrick Capobianco
>How do you cut out a blank to make a natural edge bowl?
Knowledge You Can Build On — Est. 1998
natural edge bowls
Patrick Capobianco
>How do you cut out a blank to make a natural edge bowl?
Re: natural edge bowls
Dick Hines
>Cut it on the bandsaw with the bark UP. Then put it on the lathe between centers with the bark side toward the head stock. Turn a tenon on the flat side and but it a chuck. The round side will now be at the top of the bowl. Make sure you ware a face scheel because the bark may fly off.
Re: natural edge bowls
GaryG in MD
>That's a good answer. It will work well if you have a large enough piece of wood. Here's another alternative:
If you want to start small and turn green to final thickness (which you'll probably do anyway, even with a bigger one), you can make a "birds mouth" natural-edge piece with "double bull's eyes" by starting with a branch (say 6"-8" dia.) and putting the foot on one side of the branch and the top on the other (between centers with the cut ends swinging free). Since the pith almost always cracks, you'll have to turn it fairly thin, and your success will depend on the type of wood. You'll have to monitor it closely as it dries and will probably need a little CA to stop any cracking immediately as it begins.
There was a nice one posted here recently -- just search on "bird" or something.
Show us when you're done!
Gary