Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

That chuck is HUGE Tinyelvis :)

Posts

That chuck is HUGE Tinyelvis :)

#1

That chuck is HUGE Tinyelvis :)

Devon

>Ok, I remember seeing Mike Mahoney this summer at the AAW symposium and he had a chuck that had to be at least 7-8 inches in diameter. I think it also used tommy bars. Anyone know what type of chuck this was?

Re: That chuck is HUGE Tinyelvis :)

#2

Re: That chuck is HUGE Tinyelvis :)

George Van in WI

>Mike used to use Stuart Batty jaws. I am not sure if those are the ones you saw. they were extra deep also.

Re: That chuck is HUGE Tinyelvis :)

#3

ask him (email)

Mike Schwing from Md.

>latheguy@aol.com

Re: That chuck is HUGE Tinyelvis :)

#4

I'm sure it was a Vicmarc!

Bob Elliott

>VM140

Dia. 138mm. Net Weight 4.2kg

Open from 55mm to 130mm

Thread on the chuck body M45 x 2


img