Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

?convert MT1 to MT2?

Posts

?convert MT1 to MT2?

#1

?convert MT1 to MT2?

Jerry Cox-Texas

>I am getting a new lathe, and old one is MT1, new one is MT2.I need to use accessories on both. are there conversions available? also, I will need to change to convert from 3/4"X16 to 1"X8. Where can I buy reasonably priced conversions?

Re: ?convert MT1 to MT2?

#2

Re: ?convert MT1 to MT2?

John Lucas

>You can get #1 to #2 morse taper adaptors at most any metal tooling supply house. I buy mine from www.travers.com I'm sure MSC and Enco have them. I haven't looked but Grizzly may have them also.

Re: ?convert MT1 to MT2?

#3

Re: ?convert MT1 to MT2?

John Lucas

>I forgot to tell you to buy a drift to knock them apart unless you already own one. A drift came with my drill press so I just use that.

Re: ?convert MT1 to MT2?

#4

Re: ?convert MT1 to MT2? *LINK*

Mark Kauder, Phenix City, AL

>Like John said the MT adapters are standard anywhere you get machine tools.

For the spindle adapters, go to Best Wood tools. If you intend to use a vacuum check or need to use a knockout bar, you want to pay extra for the adapters that are hollow in the middle.

Mark


http://www.bestwoodtools.com/

Re: ?convert MT1 to MT2?

#5

Dick Hines

Re: ?convert MT1 to MT2?

Dick Hines

>The Woodturners Catalog has them. The #1MT to a #2MT is only $8.99 seems lika a good price. They also carry thevspindle adapters but the are some what pricey at $59.99

Re: ?convert MT1 to MT2?

#6

Re: ?convert MT1 to MT2?

Jerry Cox-Texas

>thanx, Dick, I ordered the MT conv. from CRAFT SUPPLY (WOODTURNERS CATALOG) and the spindle conv. from PENN STATE $16.95ea.